Sealey SB565 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and
properly maintained, give you years of trouble free performance.
IMPORTANT: PlEaSE rEaD THESE INSTrUCTIONS CarEFUllY. NOTE THE SaFE OPEraTIONal rEQUIrEMENTS, WarNINgS & CaUTIONS. USE THE PrODUCT COrrECTlY
aND WITH CarE FOr THE PUrPOSE FOr WHICH IT IS INTENDED. FaIlUrE TO DO SO MaY CaUSE DaMagE aND/Or PErSONal INJUrY aND WIll INValIDaTE THE
WarraNTY. KEEP THESE INSTrUCTIONS SaFE FOr FUTUrE USE.
1. SaFETY
Refer to
instruction
manual
1.1 gENEral SaFETY
 WarNINg! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this
cabinet.
 WarNINg! Use caution when handling and assembling the metal
components. The metal may have sharp edges or corners, the use of
protective gloves is recommended.
 Keep the work area clean, uncluttered and ensure there is
adequate lighting.
 Keep children and unauthorised persons away from the working
area.
 DO NOT use the cabinet for any purpose other than that for which
it is designed.
 WarNINg! The warnings, cautions and instructions referred to in this
instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution
are factors which cannot be built into this product, but must be applied
by the operator.
2. INTrODUCTION
Manufactured from heavy gauge steel. Supplied flat packed. Quick and
easy to assemble with all nuts and bolts hidden from view once unit is
built up. Enamel finish helps prevent corrosion. Features a cylindrical
lock for added security. Suitable for site, workshop and home use.
3. SPECIFICaTION
SB565
Width: 565mm
Depth: 350mm
Height: 320mm
Weight: 9.5kg 12.2kg
4. aSSEMBlY
4.1.
ATTACH BACK PANEL TO
BASE USING FIXED
SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
© Jack Sealey Limited
INSTRUCTIONS FOR:
STEEl STOragE CHEST
MODEL NO'S:
SB765 SB1200
765mm 1200mm
350mm 450mm
320mm 360mm
21.4kg
FIXED SCREW
SB565, SB765 & SB1200
CONTENTS
BACK
FRONT
SIDES X 2
4 X PVC PLUGS
18 X LOCK NUTS
26 X LOCK NUTS
4.2.
ATTACH FRONT TO BASE USING FIXED SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
Original Language Version
BASE
LID
LOCK CONTENTS
ASSEMBLY TOOL
SB565, SB765, SB1200 Issue: 5 (S) - 07/04/17