1. Manuals
  2. Brands
  3. HORNER Shearing Manuals
  4. Farm Equipment
  5. SureGrip
  6. Instruction manual

HORNER Shearing SureGrip Instruction Manual

Hide thumbs Also See for SureGrip:
1
2
3
4

Advertisement

Table of Contents

Instruction Manual
Setting up and maintaining your handpiece

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SureGrip and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HORNER Shearing SureGrip

Summary of Contents for HORNER Shearing SureGrip

  • Page 1 Instruction Manual Setting up and maintaining your handpiece...
  • Page 2 Lubrication fig. 5 Your handpiece must be oiled at points marked “o” frequently. Oil bath – remove oil hole screw (at point ‘X’) and top up with clean SAE30 grade oil twice daily. Page 2 of 4...
  • Page 3 Fixing comb Slacken comb screws (3). Slip comb (1) behind screws, so that the comb is parallel to the heel of the handpiece, sharp face upwards. Tighten comb screws, finger tight at this stage, as any adjustment can only be made by moving the comb. Fit Cutter The pins on the outside of the fork prongs locate in the tiny holes on ends of the outside teeth of the cutter (7).
  • Page 4 THE GAP BETWEEN THE TIP OF THE CUTTER AND THE END OF THE FLAT ON THE MIDDLE TOOTH SHOULD BE AT LEAST 1.5MM Manufactured by Horner Shearing Lane Side • West Bradford • Clitheroe • BB7 4QH • United Kingdom...

Table of Contents