Cabrinha Powerlock CS3 User Manual page 21

BYPASS LEASH (optional)
™
All Cabrinha 'bow' kites can be used with the optional BYPASS™
Leash. This security leash is an optional feature and is rec-
ommended for first time users and kiteboarding schools, and
for riders who kiteboard without being hooked into the harness
loop.
If you choose not to ride with the BYPASS™ Leash, follow the
instructions on using the security pin to make sure you have a
positive connection to your kite.
TIPS
• Make sure you set up your BYPASS™ Leash properly before going on the water.
• When using your Cabrinha kite with the optional BYPASS™ Leash, you may activate the shutdown feature of the kite by
simply unhooking from the harness loop
• If hooked into the harness loop when using the BYPASS™ Leash, you must first either unhook to utilize the BYPASS™ Leash
System as a means of shutting the kite down.
CAUTION: If using a BYPASS™ Leash on the Powerlock CS3, releasing the QRS will separate you from the kite. The Powerlock
CS3 is equipped with an alternate leash attachment point above the CAS which will allow the rider to remain attached to the left
front line.
- Attach the bypass leash to your harness
- Attach the clip to the harness loop
CAUTION: If using a BYPASS™ Leash with the control system, releasing the QRS will separate you from the kite. The Override™
2 CS is equipped with an alternate leash attachment point above the CAS which will allow the rider to remain attached to the left
front line. See "Self Rescue with your kite"
CK07Control_System_Manual.indd 17
CONT ROL S Y STE M
BYPASS™ LEASH
17
4/18/06 4:22:43 PM