Canon Optura Pi Software Starter Manual page 45

4
Once you have saved the file, click
You have now succeeded in adding the file as a settings file to the computer.
5
To connect to the camera, click
[Connect to Camera].
You can add the settings files you just
added to the computer to the camera using
the same procedures as in "Saving the My
Camera Settings to the Camera" (p. 41).
• Use settings like those below when creating an image file for the start-
up image using an image editing program other than My Camera
Maker.
Compression Method
Data Sampling
Pixels (w x h)
•Use settings like those below when creating a sound file using a sound
recording program other than My Camera Maker.
Compression Method
Quantifying Bits
Sampling Frequency
Use the following lengths as guidelines for the length of sound file that
can be saved to the camera.
Type
Start-Up Sound
Shutter Sound
Operation Sound
Self-Timer Sound
and close the My Camera Maker window.
: JPEG (Baseline JPEG)
: 4:2:0 or 4:2:2
: 320 x 240 pixels
: WAV (Monaural)
: 8 bit
: 11.025 kHz or 8.000 kHz
Duration in Seconds
11.025 kHz
1.0 sec. or less
0.3 sec. or less
0.3 sec. or less
2.0 sec. or less
8.000 kHz
1.3 sec. or less
0.4 sec. or less
0.4 sec. or less
2.0 sec. or less
43