Inserting And Removing A Tape - Canon MD120 Instruction Manual

1
If a battery pack is attached, remove
it first.
2
Open the backup battery cover.
3
Insert the backup battery with the
+ side facing out.
4
Close the cover.
NOTES
The backup battery has a life span of about a
year. flashes in red to inform you that it
needs to be replaced.

Inserting and Removing a Tape

Use only videocassettes marked with the
logo.
1
OPEN/EJECT
Slide
direction of the arrow and open the
cassette compartment cover.
The cassette compartment opens
automatically.
fully in the
2
Insert the cassette.
• Insert the cassette with the window
facing the grip belt.
• To remove a cassette pull it straight
out.
3
Press the
cassette compartment until it clicks.
4
Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
IMPORTANT
Do not interfere with the cassette
compartment while it is opening or closing
automatically, or attempt to close the cover
before the cassette compartment has fully
retracted.
Be careful not to get your fingers caught in
the cassette compartment cover.
NOTES
If the camcorder is connected to a power
source, cassettes can be inserted/removed
even if the switch is set to
Getting Started 15
mark on the
.