Whirlpool ADG211 Operating Instructions

Hide thumbs Also See for ADG211:

Operating Instructions – Dishwasher Whirlpool ADG211

Control Panel

Open the detergent dispenser using button D. Insert the dishwasher

tablet into compartment A and close the cover C. The detergent

dispenser opens at the right time according to the wash cycle.

1. Open the door and press the ON/OFF button.

2. Measure out the detergent.

3. Load the racks

4. Select the wash cycle, using the above table as a guide, by pressing the P button.

5. Start the wash cycle by shutting the door.

www.sacoapartments.com

Table of Contents

Do you have a question about the ADG211 and is the answer not in the manual?

Page 1 Operating Instructions – Dishwasher Whirlpool ADG211 Control Panel Wash cycles Washing detergent Open the detergent dispenser using button D. Insert the dishwasher tablet into compartment A and close the cover C. The detergent dispenser opens at the right time according to the wash cycle.
Page 2 6. The end of the wash cycle is indicated by beeps and by the flashing of the indicator light of the selected wash cycle. Open the door, switch off the appliance by pressing the ON/OFF button. 7. Wait a few minutes before removing the crockery in order to avoid burns. Changing a wash cycle in progress To change the wash cycle open the door, taking care to avoid the escaping steam, and press and hold for ON/OFF button, the machine will switch off.