ReneSola RFL150M0101 Quick Manual

LED Flood Light

150W

Product features:

1. UL CUL DLC RoHS certificate
2. CREE Chip, high CRI
3. Warm / Natural / Cool / Cold white
4. Mean Well driver
5. Can be with 140*60° lens
6. No UV or IR in the beam
7. Instant start, NO flickering, NO humming
8. Green and eco-friendly without mercury

Product Size:

Product Specification:

Model Power Input Voltage
RFL150M0101
RFL150M0102
150W
RFL150M0103
RFL150M0104
100-240/277VAC
RFL300M0101
RFL300M0102
300W
RFL300M0103
RFL300M0104
300W

Application:

1. Factory floor, libraries, square, park;
2. Supermarkets, railway stations;
3. Convention and exhibition center,
exhibition hall, warehouse;
4. Advertising lighting, etc.
Frequenc Max Input Product Size
y Current LXWXH
1.67A 435*365*220mm
50/60Hz
3.33A 645*365*220mm

Installation Notes:

No-professional, must not install or disassemble the lamp in order to avoid being electric shock or
causing fire disaster.
Please wearing glove before install the lamp preventing being hurt.
When the lamp or electric wire smoking during install the lamp, please tun off power and inform
professional person to overhaul.
This lamp can be installed and used in the outdoor place.

Installation instructions

1. With chalk or other tools at the same level shall, in accordance with the mounting
bracket logo punch position, and then with a electric drill three holes (See Graph 1).
2. Unscrewed the screw nut, with a hammer to hammer expansion screws into the drilled
screw holes (See Graph 2).
3. Flood led light hole on fixed bracket and screw jags match, then tighten the nut
with a wrench,Fixed the lamp body (See Graph 3, Graph 4).
4. loosen screw adjust the Angle of the light body on both ends of the bracket, specific to
adjust the Angle of the need to adjust according to user's actual environment, the finish
and then screw down the screws (See Graph 5)
5. According to the connection request, the finish line to press the switch can light up
6. Connect the power's input cable to the Mains supply. (L: Black, N: White, E: Green)
Graph 1
CCT
5700K

WARNING:

5000K
1. MUST OBEY THE LOCAL COUNTRY OR REGION'S LAW OR RULE BEFORE INSTALL THE LAMP
4500K
2. PLEASE DO NOT INSTALL THE LAMP IN THE RAIN IN ORDER TO REDUCE THE CHANCE OF AMP
4000K
DAMAGE MADE BY ELECTRIC SHOCK.
5700K 3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
5000K
AND THE HAZARDS INVOLVED.
4500K
4. MIN 75 °C SUPPLY CONDUCTOR.
4000K
Graph 2
Graph 5
Graph 4
Graph 3