Sharper Image 206600 Owner's Manual

INFRARED HEATING PAD
Thank you for purchasing the Sharper Image Infrared Heating Pad.
Please read this guide and store it for future reference.
INTRODUCTION
Infrared heating pads are unlike standard heating pads - they don't get red hot to touch.
Instead, they use Far-Infrared Ray (FIR) heat that penetrates up to 3'' of bone and muscle to melt
away chronic pain. Since they can be used at lower overall temperatures, they are ideal for those
with sensitive skin.
The Infrared Heating pad is designed to provide temparary pain relieve for arthritis, carpal tunnel, joint
stiffness, cramps, sports injuries and more by utilizing a safer, low DC voltage (12V/24V) design
instead of traditional AC heating pads (110V). Carbon fiber heating elements are the source of FIR.
WHAT IS FIR?
Far Infrared Rays (FIR) are electromagnetic waves in the portion of the spectrum just beyond visible
light. Also produced by the sun, FIR provides the targeted area with deep, penetrating heat through
direct energy conversion. FIR can help to improve blood circulation by expanding capillaries, as well
as relieve nerve tension and relax muscle spasms.
The Infrared heating pad emits wavelengths of greater than 3,000 nanometer, qualifying as FIR.
Perfect as an all-purpose heating pad, the Infrared Heating Pad also doubles as a foot warmer,
offering therapeutic FIR heat over a 24'' x 35'' surface.
BEFORE USE
Handle with care. Crushing of heating wires can lead to premature failure.
Item No. 206600
IDENTIFICATION
OF PARTS
A. Power supply
B. Controller
C. Heating Pad
FEATURES
D. Power button
E. Low setting
F. Medium setting
G. High setting
H. Maximum setting
OPERATION
1. Connect power supply to the controller by firmly
inserting the male end of the power supply into the
female end of the controller.
2. Plug the power supply into an AC outlet.
3. Align the slot on the male end of the controller with
the notch on the female end of the heating pad and
connect the plugs together.
4. Align the plastic nut on the male end with the
threads of the female connector and tighten
by turning clockwise.
NOTE: Do not turn on heating pad while folded.
5. Press and hold the Power button for two seconds.
The default setting is Medium heat and will
display a orange light.
6. Press the power button once to change the
heat setting.
7. Power will turn off automatically within 1hr in every setting.
8. To power off, press and hold the Power button for two seconds until the lights on the
controller turn off.
NOTE: Unplug power supply from outlet when not in use.