Download
Share
Print this page
Garage Smart AGS001 Installation Manual
  1. Manuals
  2. Brands
  3. Garage Smart Manuals
  4. Door Opening System
  5. AGS001
  6. Installation manual

Garage Smart AGS001 Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
Smart Garage
AGS001

Advertisement

loading

Summary of Contents for Garage Smart AGS001

  • Page 1 INSTALLATION GUIDE Smart Garage AGS001...

  • Page 2: What's In The Box

    WARNING TO PREVENT SERIOUS INJURY FROM YOUR MOVING GARAGE DOOR OR GATES: ü DO NOT let children use Smart Garage Door Opener product and app without adult supervision. ü ONLY operate your Smart Garage Door Opener device when you are in clear view of your garage or gate, and you have verified that there are no objects are obstructing the operation of the door.

  • Page 3: Compatibility Check

    COMPATIBILITY CHECK Verify the Smart Garage Door Controller works with your garage door 1. Look for your garage door on the included “Garage Door Compatibility Guide”. Ø Garage door openers with yellow / purple learn buttons will likely NOT work. 2.

  • Page 4: Installation

    INSTALLATION 1. Check your Wi-Fi Ø Check the Wi-Fi signal in the garage, where the Smart Garage Controller will be mounted 4 to 5 feet away from the garage door opener. 2. Power up your device Ø Find a convenient location and power the Smart Garage Controller by plugging it in.
  • Page 5 Add Controller Device in the APP 1. Launch the app and tap the Plus ( + ) in the top right corner to add a door sensor device. 2. 3. 4. Select Add manually, Electrician, then Garage Door Opener.
  • Page 6 Add Controller Device in the APP 5. Choose your Wi-Fi network and Enter the password. Then tap Next. 6. IMPORTANT !!! Press and hold the ON/OFF button on the Controller Device until the light is SLOWLY blinking (2s/time). Ø Tap the “EZ Mode” on the top right corner, change to “AP Mode”. Ø...
  • Page 7 Add Controller Device in the APP 7. Tab Go to Connect. 8. Select WLAN on your mobile phone setting.
  • Page 8 Add Controller Device in the APP 9. Choose SmartLife-XXXX network on the WLAN setting. Switch back to Smart Life app when WLAN is successfully connected to SmartLife-XXXX network.
  • Page 9 Add Controller Device in the APP 11. It will show Adding device on the Smart Life App. 12. Now your Controller Device is successfully added. Tab Done.
  • Page 10 Install the Controller Device to the garage opener 1. STEP 1 : Connect Controller to Opener Ø Locate the 2 exposed wires coming out of the Controller. Ø Insert the 2 exposed wires into the terminals on the back of your Garage Door Opener.

  • Page 11: Installation Overview

    Installation Overview...