Page 1
CBI Astute Instruction Manual Wi-Fi enabled Scheduled energy management Energy monitoring Automation and IoT Device automation sharing CBI Home App and more...
Installation Astute Smart Controller (ASC) This device must be installed by a qualified electrician. Isolate supply before installing the ASC Install the ASC on either mini rail or DIN rail (remove the escutcheon adaptor for DIN, see Figure 1) Connect the ASC according to Figure 2 or 3. Observe markings for line and load terminals.
Figure 3: Stand alone wiring LED (BLUE / RED) POWER BUTTON REBOOT BUTTON Reboot Button - If needed, press and hold the reboot button for 1 second to reboot the ASC. CBI Astute Instruction Manual Page 3 3990A963 REV A...
Installation Astute Smart Isolator (ASI) This device must be installed by a qualified electrician. Isolate supply before installing the ASI Install the ASI in the outlet box Connect the ASI according to Figure 4. Observe markings for line and load terminals.
CBI Astute Smart Controller (ASC) / Astute Smart Isolator (ASI) • ONLY compatible with 2.4 GHz Wi-Fi with internet connection • Free CBI Home App available to control these devices • Manual ON / OFF switch (Power Button) • Multiple ON / OFF programs...
Page 6
Home App, tap “Allow” on the tap on register: pop-up message if you would like to receive notifications. A privacy policy pop-up message will appear, read and tap “Agree” to proceed: CBI Astute Instruction Manual Page 6 3990A963 REV A...
Page 7
Register with an email address or mobile number. Once the chosen email address or mobile number has been entered, tap on “Get Verification Code”. A six digit verification code will be sent to the email address or mobile number provided. CBI Astute Instruction Manual Page 7 3990A963 REV A...
Page 8
Enter the 6 digit verification code to register a user profile. CBI Astute Instruction Manual Page 8 3990A963 REV A...
Page 9
Once the verification code has been entered, create a personalised password and tap “done”. The password must contain 6 to 20 letters and numbers. Allow the App to use your location (tap allow). CBI Astute Instruction Manual Page 9 3990A963 REV A...
Page 10
Tap “add device” to add the device to your App (smartphone / tablet should be connected to the same 2.4 GHz Wi-Fi connection). For adding additional devices tap “+” in the right-hand corner. CBI Astute Instruction Manual Page 10 3990A963 REV A...
Page 11
Step 5 - Initiate pairing mode Push and hold the Power Button on the CBI Astute Smart device for 5 seconds and release. Observe the LED indicator light flashing blue rapidly. If yes, pairing mode is active, tap “confirm indicator rapidly blink”...
Page 12
If connection attempt fails: Repeat step 5. If the problem persists, repeat step 3 to 7 or contact CBI on the support email: astute@cbi-electric.com. Note: If the indicator light stops flashing while in pairing mode the device has been found and is busy CBI Astute connecting.
Page 13
Step 8 - Rename the device Tap on the edit button and change the device name if required. Press save. CBI Astute Instruction Manual Page 13 3990A963 REV A...
Page 14
App. or swipe to the left to delete (dependant on mobile platform) Programming instructions available online: www.cbi-lowvoltage.com/ASC www.cbi-lowvoltage.com/ASI; or scan one of the QR codes: CBI Astute ASC: ASI: Instruction Manual Page 14 Alternatively subscribe to CBI’s YouTube channel...
A: Go back to step 1 and download the App by scanning the QR code. 2. Cannot discover the device on the App A: Ensure that the Wi-Fi router is 2.4 GHz and CBI Astute connected to the internet; and that the smartphone and Instruction Manual ASC / ASI device connects to the same Wi-Fi.