Advertisement
Quick Links
Advertisement
Related Manuals for YAEN MP58A1
Summary of Contents for YAEN MP58A1
- Page 1 58mm Thermal Printer User Manual MOBILE THERMAL PRINTER User Manual 1 / 8...
- Page 2 58mm Thermal Printer User Manual PRECAUTIONS Safety Precautions 1) Be sure to use the specified battery and power supply provided by our company. 2) Connection to an improper power supply may cause burning, explosion or damage to printer. 3) Don’t put the battery into fire or water, don’t disassemble or modify the battery, don’t be short circuit, otherwise may result in injury or even fire explosion.
- Page 3 58mm Thermal Printer User Manual Battery Safety Precautions 1) Be sure to carefully read the user manual before using this product. 2) Ignore the following instructions may cause battery overheating, burning, explosion, damages the performance and reduce the product life. ①...
-
Page 4: Chapter 1 Brief Introduction
58mm Thermal Printer User Manual CHAPTER 1 BRIEF INTRODUCTION 1.1 Appearance Printer top cover USB interface Feed button Power button Power Button: long press to power on/off the printer, short press enter to setup menu; Feed button: Press the【FEED】 when the printer in normal operation condition, the printer will feed paper;... -
Page 5: Chapter 2 Specifications
58mm Thermal Printer User Manual 1.2 Printer accessories Plug Paper roller 1500AH battery Micro USB User manaul Leather case(Optioan) CHAPTER 2 SPECIFICATIONS ITEM Parameter Printing method Thermal dot line printing Printing Resolution 203dpi, 8dots/mm Printing speed (Max) 70mm/s Width 58mm Valid printing width 48mm Printing... -
Page 6: Chapter 3 Operation Methods
58mm Thermal Printer User Manual CHAPTER 3 OPERATION METHODS 3.1 Preparation Before Using 3.1.1 Li-ion Battery Installation 1) Refer to the above picture, put the battery in the battery slot and close the battery case. 3.1.2 Paper Loading 1) Hold tight of the printer and the other hand pull the printer top cover up; 2) Put paper roller inside, and be well noted that the paper shall be in right direction, see picture 2;... - Page 7 58mm Thermal Printer User Manual 3.2 Preparation Before Using ① Under Android terminal: Turn on the Bluetooth in the terminal to search for the right printer and input the password “0000” to connect and do the print (Support Android4.0 and above). ②...
- Page 8 58mm Thermal Printer User Manual 3.3.2 LED indicator Blink Slowly Blink Fast Power Power on Status Stand by Status Bluetooth BT Connected BT Abnormal Charge Power off Charging Power on Charging Battery Low Error Paper out Status Cover Open Status High Temp.