Page 1
Lean2 Floor To Surface Screens INSTALLATION GUIDE a DeskMakers brand...
Page 2
ASSEMBLY INSTRUCTIONS: Step 1 Position and level frame on the desk surface. Be sure that all 4 Levelers are touching the floor (L1, L2), and Desk Surface (L3, L4). Step 2 Clamp the Frame to the Desk Surface firmly.
Page 3
Step 3 Turn Levelers L1 and L4 clockwise until the frame is tight against the floor and back of desk surface. NOTE: If frame is still loose - use a wrench or pliers to tighten levelers until Frame is solid and secure.
Page 4
- AVOID PLACING EXTREMELY HOT & COLD ITEMS ON THE SURFACE. CARE and MAINTENANCE: Clean your LEAN2 with warm water and dry with a soft absorbent cloth towel. Do not use bleach or solvents to clean this product! This will void the warranty. Lack...