Do you have a question about the HM-HF008 and is the answer not in the manual?
Questions and answers
Summary of Contents for Homech HM-HF008
Page 1
Inflatable Stand Up Paddle Board HM-HF008 www.homech.net User Manual...
Page 2
THANK YOU FOR CHOOSING HOMECH INFLATABLE STAND UP PADDLE SUP BOARD. BE SAFE AND HAVE FUN! IMPORTANT SAFETY INSTRUCTIONS KNOWING YOUR SUP BOARD GETTING STARTED STORAGE AND MAINTENANCE TROUBLESHOOTING...
Page 3
IMPORTANT Always wear a Coast Guard Never go boarding in severe DO NOT leave the board approved Personal Flotation conditions. Beware of offshore exposed to direct sunlight for Device (PFD). winds and currents. extended periods of time. SAFETY Keep away from fire. INSTRUCTIONS DO NOT use around sharp objects.
Page 4
Secure Bungee Pump (Cargo Area) Base Snap-in Fin Safety Leash Waterproof KNOWING Dual Action YOUR Carry Handle Hand Pump D-Rings SUP BOARD (Secure Seat) Valve Repair Repair Valve Adapter Wrench Patch Glue (Standard Valve for Car and Bicycle Tires) Pump Hose Unpack and check that all accessories are inside.
Page 5
Dual Action Hand Pump Use of Pump DEFLATE Port GETTING INFLATE Port STARTED Inflating / Deflating Screw the pump hose onto the INFLATE / DEFLATE port. Pressure Gauge Pressure Level Assembly of Base Assembly of Handles Adjusting Pressure Level Align and twist to lock. Screw in two handles.
Page 6
Inflating the SUP Board Installing the Fin Make sure the fin is secured before paddling. Remove the Unroll the paddle board on level Remove the valve cap and Screw the pump hose Flip the Slide the fin into Lock the fin by ground with the air valve facing up.
Page 7
Repairing Leaks & Tears Repair Repair Patch Glue Tears (< 10 mm) 1. Deflate the board completely. 2. Locate the leak. Wipe clean and dry. 3. Cut a suitable size of patch. Apply glue to the plain side. 4. Apply glue to the leak on board, Attaching the Safety Leash Leaking Valve wait for 1 minute.
Page 8
Disassembling the Fin STORAGE Press down to remove the clip. Slide the fin out of its base. Insert the anti-deformation gasket. Deflating the SUP Board MAINTENANCE For storage, you may roll up the board and store with all accessories in the included backpack. Remove the valve cap.
Page 9
It is easier to paddle with the logo facing towards the front of the board. Which direction should be the “Homech” This allows the water to slip more easily past the blade as it moves logo face when paddling? through the water.
Page 10
We can only provide after sales service for products that are sold by Homech or Homech authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
Need help?
Do you have a question about the HM-HF008 and is the answer not in the manual?
Questions and answers