Channel Scan - Cobra microTalk PR260 WXC Owner's Manual

All manuals and user guides at all-guides.com
Introduction Operation
Intro
To Set VOX Sensitivity:
Mode/Power
1. Press the Mode/Power button until the VOX
VOX Sensitivity Level
Secondary Icons
Channel Button
2. Press the Channel Up or Channel Down
3. Choose one (1) of the following:

Channel Scan

Your microTALK ® radio can automatically scan channels.
To scan channels:
Mode/Power
1. Press the Mode/Power button until the
2. Press the Channel Up or Channel Down button
Scan Channels
Channel Button
The Scan icon will continue to be displayed
when scan is on. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not press any buttons for 15 seconds
your radio will automatically return to Standby mode on the channel or
channel/privacy code displayed before you entered mode functions.
Customer Assistance Warranty
Operation Customer
Assistance
icon flashes and the current sensitivity level
is displayed.
The current VOX sensitivity level is
displayed with letters "LE" and a Number
1 through 5, with Number 5 being the
most sensitive level and Number 1
being the least sensitive level.
button to change the setting.
Notice
a. Press the Mode/Power button to enter
the selected setting and proceed to other
functions.
b. Press the Lock button to enter the selected
setting and return to Standby mode.
Scan icon and the channel numbers appear
on the display.
to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
Warranty
•
9