Westfalia Wetekom FS-500 Instruction Manual page 32

5. A preview image will be shown in the preview area. If the preview image is
not accurately framed, you can micro-adjust the location of the film by hand
moving the negative film/slide holder. Then previewed image will be adjusted
according to your movements.
6. Click "Snap Shot" on the screen or press the
COPY button (2) on the scanner. A green
frame will indicate the selected picture(s) in the
preview area; the maximum is 12 pictures in
the preview area. If there are more than 12
pictures scanned, the 13th picture will overwrite
the 1st picture.
7. Press "Transfer" to save the selected pictures to your computer.
8. The "Transfer" process will transfer all preview
images in one go. When this process is
finished all former preview images will be
deleted automatically.
9. Press "Delete" to delete / remove a selected
image from the preview screen.
Hints:
To ensure the best image quality, please allow about 5 seconds between
Snap Shot and Transfer for white balance enhancement.
The button "Color / Brightness" will open a new window
that lets you change the exposure setting manually to
adjust for the brightness and the colour balance of your
picture (Red, Green and Blue can be adjusted sepa-
rately.). This feature helps to achieve better results when
the film is canned. Check the result of the compensation
by viewing the image on the screen.
When the row of the 12 preview images is completely filled, a message
"please transfer images before next scan" will appear.
Do not minimize the window of converting screen after transferring the
pictures. If you want to see the scanned pictures, click Exit and you will see
the picture you scanned before.
Using the Scanner
27