Original BTC Primo FF463N Instruction Manual

Table & floor light

Advertisement

Safety Instructions

These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp (bulb).
- Do not touch the lamp or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure your light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.

Cleaning and Maintenance

Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives.
Glass can be cleaned by hand, using a soft damp cloth with a diluted mild detergent (nonabrasive) or
suitable glass cleaner if necessary. Switch off power to the fitting before cleaning. Spare parts are
available for this product, please see contact details below.
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.
ORIGINALBTC.COM
+44 (0)1993 882 251
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Primo
Table & Floor Light
v1.1- 11.18
Instruction Manual
MADE IN BRITAIN
Primo Floor Light
Primo Table Light
FF463N
FT311

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Primo FF463N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Original BTC Primo FF463N

  • Page 1 Switch off power to the fitting before cleaning. Spare parts are available for this product, please see contact details below. Primo Floor Light Primo Table Light Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and FF463N FT311 contemporary homes.
  • Page 2 Primo Table & Floor Light Assembling Base 230V ac 50Hz IP20 FF463N Primo Floor Light FT311 Primo Table Light A Stem C Coupler B Thread D Base Moulded prismatic glass shades sparkle and refract light, providing an even, glare-free illumination whose tone can be changed dependent on the bulb used.

This manual is also suitable for:

Primo ft311Primo ft311n halPrimo ft311n led

Table of Contents