DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab Screen_
to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect
bank to a deck or Master Output. To activate an effect, click the ON button on
your FX UNIT in the software, or the FX1 ON button on your controller. You can
adjust effect parameters by using either software controls, or the FX1/FX2/FX3
knobs/buttons on the controller.
There are two available modes in the DJ-FX. Single FX Mode allows you to se-
lect one effect per FX bank, and has multiple parameters that can be adjusted.
Multi FX Mode allows you to select up to three effects per FX bank, and adjust
only one parameter, the FX Depth. The same effects available in Single FX mode
are available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX
mode button
or Multi FX mode button
Reloop Terminal Mix 8
Manual Loop Mode
Control
FX1 Button
Effect On/Off
FX1 Knob
Adjust FX Slot Parameter
(Wet/Dry)
FX2 Button
Adjusts FX Modifier
FX2 Knob
Adjusts FX Modifier
FX3 Button
Adjusts FX Modifier
FX3 Knob
Adjusts FX Modifier
SHIFT + FX 1-3 Buttons
Select Effect
NOTE: Use 1 - 2 on the left deck to assign FX UNIT 1 to the Active Deck.
Use 1 - 2 on the right deck to assign FX UNIT 2 to the Active Deck.
Serato Video
Serato Video is an Expansion Pack for Serato Software which adds the ability to
playback and mix video files, use effects and fader transitions with your Serato
DJ hardware, an additional MIDI controller or your mouse/keyboard.
For more information on Serato Video go to http://serato.com/video
MIDI
The MIDI control feature in Serato DJ provides the ability to map Serato DJ
software functions to MIDI controller functions such as keyboards, triggers,
sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can
improve live performance usability, such as hitting pads on a MIDI controller to
trigger Loops and Cue Points.
For more information download the Serato DJ manual by going to http://serato.
com/dj/downloads
Loop Roll Mode
NOTE: You can not MIDI Map your Reloop Terminal Mix 4, you will need to
Slot 1 Effect On/Off
connect an additional MIDI controller to use these MIDI functions.
Adjusts Slot 1 FX Parameter
Slot 2 Effect On/Off
Adjusts Slot 2 FX Parameter
Slot 3 Effect On/Off
Adjusts Slot 3 FX Parameter
Select Effect in Slots 1-3
Need help?
Do you have a question about the Reloop Terminal Mix 8 and is the answer not in the manual?
Questions and answers