9. REC Time 20. How to use Multi-key 10. LED Guide 21. Specification 11. Voice Guide 22. After-sales service Guide 12. PC Viewer Installation 13. PC Viewer Program 14. Playback 1. Playback in normal video 2. Playback in dedicated video CAMMSYS CH-300...
C or 60°C) may cause malfunction or breakdown of the product. (Please keep the storage temperature when not Even if overwriting is set to Off, some recorded files may be using the product.) deleted to make free space at boot time. CAMMSYS CH-300...
Page 4
Typically, SD cards are consumable good and may not be able to save data when used for a long time. In this case, please purchase a new SD card and check the recorded video and SD card to make sure there is no problem for data storage. CAMMSYS CH-300...
Ability to set each capacity of the driving / Event / Motion unit) folder Security LED lamp on the Front body (LED lighting High quality voice record and voice function ON / OFF can be set in PC viewer only) guidance CAMMSYS CH-300...
※ Before using the micro SD card, please install the viewer program on the PC. (If the viewer program has deleted from the SD card, you can download it from our website.) The picture of the packaged product in the User's Manual may differ from the actual product. CAMMSYS CH-300...
5. Structure Bracket Front Camera Power port Rear Camera port GPS port Security LED Power ON/OFF WLAN (Multi Key) SD card socket MIC/Speaker GPS LED REC LED CAMMSYS CH-300...
(check the any faulty of the SD card) 4. Attach the bracket at the left which 6. After checking the device, clean up the 5. Connect the Hardwire cable into car from the windshield. cables. fuse box. (except cigar lighter cable) CAMMSYS CH-300...
Page 10
Arrange the wire by using the cable clip. the camera connection, (ㄱ) shape's one (Please be careful not to drop or damage to the device. (※caution : Please note that if the cable during installation.) the wrong connection, the video will not be output.) CAMMSYS CH-300...
Page 11
1. How to install a fuse cable Fuse cable has 3 lines.(connect to the fuse box only) : Connect to stop and emergency light. Battery Line (Red) : Connect to Fuse power ACC Line (Yellow) Ground Line (Black) : GND CAMMSYS CH-300...
ㆍOther electronic devices may have interfered with GPS signal if placed too close to the device. Keep its distance from them as much as possible. ㆍGPS may be affected by weather conditions, satellite signal, or surrounding geographical features. ㆍCoated windshields can interfere with GPS signal which may result in poor or blocked GPS reception. CAMMSYS CH-300...
8. How to Record 1. Recording : CH-300 is automatically booting at power on, and a constant(normal) recording starts as an initial recording mode. 2. Recording Mode : it is classified into driving recording mode and parking (motion) recording mode.
By Type: When saving a recording file, set the memory usage ratio by recording type. If the memory space is full then the recording files have automatically deleted sequentially. Hence, the accident video recording files may also have deleted. CAMMSYS CH-300...
DirectX support (WPF) 2. Install Download the latest CAMMSYS Viewer on the website. (www.blacksys.co.kr/en) If you run “Setup.exe“, CAMMSYS Viewer will be installed. After the installation, it will be continued following to the installation sequence of setting up the dialog box.
Page 18
1.Click the Next button 2. Select the save location 3. Click the install button to install 4. Click the Finish button ※ Depending on your PC environment, the program installation may take a long time. CAMMSYS CH-300...
13. PC Viewer Program 2 3 4 5 6 7 13 14 15 16 CAMMSYS CH-300...
Page 20
Play list / Map button GPS Signal Condition Finding file location Driving Speed REC file list/Map display switching button Playing bar Latitude / Longitude Full screen G-sensor Information Switching Left & Right Playback Video display Switching Up & down File Skip Back CAMMSYS CH-300...
(Parking mode) ㆍ : Event record which is detected a shock by shock sensor. ㆍGPS Information is displayed in the original viewer. You can check only front REC when playing by a video player not CAMMSYS player CAMMSYS CH-300...
P : Parking REC file list 4) Loading playback files Click the magnifying glass on the FILE LOCATION at the top right of the viewer to specify the SD card path. The file list is then automatically sorted by recording attributes. CAMMSYS CH-300...
-> ADAS Settings -> Change Change the detection area to operate LDWS (over up to max.middle area) After set up, press the finish button and send, the dashcam will be rebooted and the setting value after booting is applied. CAMMSYS CH-300...
Android Market App Store - Support for Android and iOS - Search “CAMMSYS” on Google play and APP store in iTunes. Precaution before use - Real-time and playback images may be delayed depending on the specifications of the smartphone. - Do not use while driving for safe driving because there is an accident risk during driving (always use after parking/stop).
- For iPhone, it will enter the main menu immediately as soon as you press START button by connecting Wi-Fi manually in the setting menu. 2) Reset password : Reset the Wi-Fi password '00000000' on your phone. (Android only) 3) iOS connection password : Enter the initial password '00000000' in the Wi-Fi settings menu. (iOS only) CAMMSYS CH-300...
3. Main Screen 4. Viewing video Move to the screen when selecting menu. - You can watch the video in real time - F / R button (Front / Rear video switching) CAMMSYS CH-300...
Page 27
- After selecting a file, you can play and delete the video. - Continuous downloading is possible when multiple files are selected. CAMMSYS CH-300...
Page 28
- The SD card format function allows you to format the - If the downloaded firmware version is higher than the SD card in real time. dashcam firmware version, it can be updated. CAMMSYS CH-300...
4) If you exit from live view, return to the original bitrate with the "ddiri-ring" notification. 5) If you do not use Wi-Fi for more than 15 minutes, the Wi-Fi setting of the dashcam will automatically turn off. * Wi-Fi bitrate : 4Mbps * normal bitrate : HD=4Mbps / FHD=8Mpbs CAMMSYS CH-300...
17. How to separate video 1) Press “Front & Rear Extract” button on the original PC viewer program. 2) Select a video file to separate and click “OK” button. 3) Saved separated file in(ex: C:\Users\AppData\Roaming\CAMMSYS\Video) CAMMSYS CH-300...
3. If you press the button briefly in the formatting step, the SD card will be formatted and it will switch to normal recording after formatting has completed. ※ If the button is not pressed during the formatting step, the voice guidance will be repeated and the formatting will automatically be canceled when the power is turned off. CAMMSYS CH-300...
If you press and hold the Multi-Key button for about 6 seconds, it will “ding-dong” sound twice, and when you release the button, the WLAN will be activated with the message "Wi-Fi is on". If you want to turn off the WLAN, you press and hold the button for 6 seconds again. CAMMSYS CH-300...
Page 33
The SD Card Format is used to notify the system of fo rmatting to create a system config file when inserting the SD Card If you do not press the WLAN Button, a Format notification will be generated continuously. CAMMSYS CH-300...
Shock senser optional setting menu) : 11.4(23.1) / 11.6(23.4) Cut-off voltage / 11.8(23.7) / 12.0(24.0) / External GPS 12.2(24.3) / OFF Operating -20℃ ~+60℃ Power input DC 12V~24V temperature Super Cap Storage Battery -30℃ ~+80℃ 2.5F@5v(5F@2.7V x 2ea) temperature CAMMSYS CH-300...
PC. If the file is deleted due to the times away, the Company may be disconnected even in the Parking Mode disabling the recording. shall not take responsibility. CAMMSYS CH-300...
Page 36
This device is a Class A for electromagnetic compatibility registration for commercial use. So please pay attention to this point by the seller or the user. Representative Information CAMMSYS Corp. Cammsys MG Shim / Tel : +82-70-4680-2049 / Email : mingyus@cammsys.net 26, Venture-ro, 100beon-gil, Yeonsu-gu, Incheon, 22013, Korea EU Importer : Trendmarq / Tel : +31-651897152 / Email : fred.mies@trendmarq.com Industrieweg 46, P.O.