Summary of Contents for Proteco 10.55-P800E
- Page 1 55-P810E-RED WELDING HELMET WITH AUTOMATIC DARKENING meant for welding and grinding 10.55-P800E, 10.55-P800E-C, 10.55-P800E-F, 10.55-P810E-RED PROTECO nářadí s.r.o. www.proteco-naradi.cz...
-
Page 2: Technical Data
Dear customer, thank you for purchasing the PROTECO welding helmet. Original Instructions for use for the automatically darkening welding helmet 10.55-P800E; (E-C); (E-F); 10.55- P810E- -RED. INTRODUCTION Please read the Instructions for use carefully. The helmet is primarily intended for welding, but can also be used for grinding. - Page 3 Tighten the lock nut. After lowering the helmet, the filter should be against the eyes. The star nuts on the pivot pins are used to adjust the resistance when lowering the helmet. PROTECO nářadí s.r.o. www.proteco-naradi.cz...
-
Page 4: Warnings And Important Notices
Radiation from the welding arc can seriously damage the eyes! Do not expose the helmet to rain. Do not immerse the filter cartridge into water or wash it with water! Protect the helmet, especially the cartridge, from shocks and high temperatures! PROTECO nářadí s.r.o. www.proteco-naradi.cz... -
Page 5: Maintenance
1) The switch is in the GRIND position for 1) Check the welding-grinding switch, grinding. whether it is in correct position. 2) Heavily soiled protective foil. 2) Replace the protective foil. Slow filter response. Low operating temperature, insufficient Change the work environment. ambient light. PROTECO nářadí s.r.o. www.proteco-naradi.cz... -
Page 6: Settings Table
TIG – arc welding with non-melting electrode MIG – welding in protective atmosphere using Argon MIG – with light alloys in protective atmosphere using Argon Air-arc gouging PAC – plasma jet cutting PAW – microplasma arc welding SAW – submerged arc welding PROTECO nářadí s.r.o. www.proteco-naradi.cz... - Page 7 Electrical appliances do not belong in municipal waste. Manufacturer's registration number: 02355/05-ECZ The company PROTECO nářadí s.r.o. does not assume any responsibility for damage or injury caused by improper use. INFORMATION Any information, illustrations, and specifications are based on the latest product information available at the time of printing these Instructions for use.
-
Page 8: Eu Declaration Of Conformity
Product: 10.55-P800E-C Welding helmet with automatic darkening P800E with carbon print – PROTECO 10.55-P800E-F Welding helmet with automatic darkening P800E with a motive of FLAMES – PROTECO 10.55-P810E-RED Welding helmet with automatic darkening P810E RED – PROTECO Type of product: GX-600R, SUPER The product meets all relevant provisions of technical regulations, i.e. -
Page 9: Warranty Card
WARRANTY CARD Stamp and signature of the dealer: …………………………………………………………………………………………………………………………………………………………… Date of sale: ………………………………………………………………………………………………………………………………………. Records on repairs made (date, signature): 1. ……………………………………………………………………………………………………………………………………………………….. 2. ……………………………………………………………………………………………………………………………………………………….. 3. ……………………………………………………………………………………………………………………………………………………….. PROTECO nářadí s.r.o. www.proteco-naradi.cz... - Page 10 Manufacturer: PROTECO nářadí s.r.o. Branch: Podbřezí 63, 518 03 www.proteco-naradi.cz PROTECO nářadí s.r. Branch: Podbřezí 63, 518 03 www.proteco-naradi.cz PROTECO nářadí s.r.o. www.proteco-naradi.cz...