SA1F Time of Flight Laser Sensor
Required Overcurrent Protection
WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and
regulations.
Overcurrent protection is required to be provided by end product application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
Repeatability Performance
SA1F-12※
・Speed: Fast (1.5ms)
・Speed: Medium (32ms)
・Speed: Standard (8ms)
・Speed: Slow (256ms)
7