Table of Contents
Advertisement
Quick Links
3170
Designer Three Panel Screen
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377,
e-mail: customerservice@wincomfg.com before attempting to use this product; otherwise injury may occur.
Winco assumes no responsibility for damage or injury caused by the
1.
READ AND FOLLOW ALL DIRECTIONS.
2.
NEVER place screen on a cart, table, stand or other objects; Screen could fall and INJURY MAY OCCUR.
3.
NEVER place screen near open flame or over a radiator or heat register.
4.
NEVER place screen in front of a door or exit sign; or during emergency screen could hinder evacuation.
5.
SUFFOCATION DANGER to children if vinyl is not attached to screen; Screen could block nose and
mouth
and prevent breathing. VINYL SCREEN IS NOT A TOY.
6.
DO NOT allow children to play with screen; Screen could fall and INJURY MAY OCCUR.
7.
Screen should ALWAYS be positioned on level surface. 8. NEVER stand or ride on screen legs; INJURY
MAY OCCUR.
DO NOT use screen in or with ANY type of vehicle or trailer.
9.
DO NOT attach objects to screen frame; Screen can tip over and INJURY MAY OCCUR.
10.
Remove from service; Any screen with broken or missing parts, torn vinyl, or other visible damage.
11.
USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
12.
SAVE THESE INSTRUCTIONS for future reference and training.
13.
Tools needed:
•
Scissors or box cutter
•
5/32 Allen Wrench (provided)
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
1.
After checking your product for any shipping damage, remove all packing material and hardware that was
secured for shipping. Cut tape and/or plastic with scissors, being careful not to damage screen.
LEG INSTALLATION
SEE PHOTOS, NEXT PAGE
2.
Insert both Leg Frame Assemblies (#3) into the bottom of the Wing/Mid Frame Assembly (#1A). Line up the
holes in (#3) w/ the holes in (#1A).
3.
Using the Allen Wrench provided screw in 1-Button Socket Screw (3D), per leg, through (#1A) and into (#3)
006250
assembly, installation or use of these products.
CUSTOMER INSTRUCTIONS
Rev N Date 06-26-13
Page 1 of 5
improper
JWC
Advertisement
Table of Contents
Related Manuals for Winco 3170
Summary of Contents for Winco 3170
- Page 1 PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377, e-mail: customerservice@wincomfg.com before attempting to use this product; otherwise injury may occur.
- Page 2 Periodically check all fasteners for tightness. To clean Vinyl Panels use only mild liquid soap and water. – Storage and/or shipping causes wrinkles in the vinyl of your Winco Screen; This is normal. Please allow 1- Wrinkles in Vinyl 2 weeks at room temperature (approx. 70+ degrees) to allow for vinyl to return to original appearance.
- Page 3 3170 Vinyl Panel 3 Visit our website www.wincomfg.com/product-documents/parts-lists for a complete parts list catalog of your chair or call Customer Service @ 1-800-237-3377 to request it by mail. Other Quality Winco Medical Furnishings You May Be Interested In: 006250 Rev N Date 06-26-13...
- Page 4 Page 4 of 5 Visit us online at www.wincomfg.com 006250 Rev N Date 06-26-13...
- Page 5 Page 5 of 5 Design, appearance, parts, & construction are subject to change without notice 006250 Rev N Date 06-26-13...
Need help?
Do you have a question about the 3170 and is the answer not in the manual?
Questions and answers