PWDC-5 COLLECTOR BY APEX MACHINE GROUP WARRANTY AND SERVICE APEX Machine Group warrants every product it sells. If you need service or repair, contact us or one of our Service Dealers. WARRANTY Apex Machine Group machines carry a limited warranty which varies in duration based upon the product.
Page 3
MACHINE WARRANTY REGISTRATION By e-mail at: www.apexmachinegroup.com Or mail a registration card to: Apex Machine Group 4700 Olson Memorial Highway Golden Valley, Minnesota 55422 Warranty Registration Card Model No. ______PWDC-5 Collector________ Serial No. ______________________________ Date Purchased: ________________________ Company Name:_________________________ Address:_______________________________ ____________________________________ Phone No:______________________________ E-mail Address:__________________________...
TABLE OF CONTENTS Warranty and Service ....................2/3 Table of Contents ....................4 Warning ........................5/6 Introduction ......................6 Specifications ......................7 Unpacking ....................... 7 Installation and Assembly of Unit ................7 230 Volt Operation ....................8 460 Volt Conversion ....................8 Operating Controls ....................
WARNINGS Please note: You can be seriously injured working on or around machinery. Only do service work for which you have the knowledge and proper equipment. If you have any doubt about your ability to perform a service job, please call our toll free line at 877-754-7266 or 855-500-7239 or contact an authorized dealer to schedule a qualified technician.
APEX Machine Group who can also be reached at our web site: www.apexmachinegroup.com (855-500-2739) or (952-895-1518). SPECIFICATIONS Model Number: PWDC-5 Main Motor: 5 HP, 3 HP, 208/230 V Dust Collector Inlet: 6 inch Dust Collection CFM:...
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, APEX Machine Group, reserves the right to change specifications at any time without prior notice. UNPACKING Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent.
that if waters comes out of the top of the exhaust silencer the water level is too high and you need to take out some of the water. 10. After water and rust additives are added, and the inlet pipe is connected, start unit and check the current draw.
Page 12
SINGLE PHASE ELECRICAL BOM PWDC EZ WC 52303-1 PWDC-5 ELECTRICAL PARTS LIST 230/1/60 2019/03/19 24.4 FLA Sheng Description Symbol q'ty REFERENCE ITEMS SEE ELECTRICAL NAMEPLATE FOR OPTIONS SUPPLIED WITH THIS MACHINE ELECTRICAL DIAGRAM 52303-00-E1 COMMON PARTS ELECTRICAL ENCLOSURE HEAD NO. 1 (FLA 24.4)
Page 13
THREE PHASE ELECTRICAL DIAGRAM 230 OR 460 VOLTAGE...
Page 14
THREE PHASE ELCTRICAL BOM 230 VOLT PWC EZ WC 52303-1 PWDC-5 ELECTRICAL PARTS LIST 230/3/60 2012/06/19 12.4 FLA Sheng Description Symbol q'ty REFERENCE ITEMS SEE ELECTRICAL NAMEPLATE FOR OPTIONS SUPPLIED WITH THIS MACHINE ELECTRICAL DIAGRAM 52303-1-E1.E2 COMMON PARTS ELECTRICAL ENCLOSURE HEAD NO.
Page 15
THRE PHASE ELECTRICAL BOM 460 VOLT PWC EZ WC 52303-1 PWDC-5 ELECTRICAL PARTS LIST 460/3/60 2012/06/19 6.2 FLA Sheng Description Symbol q'ty REFERENCE ITEMS SEE ELECTRICAL NAMEPLATE FOR OPTIONS SUPPLIED WITH THIS MACHINE ELECTRICAL DIAGRAM 52303-00-E2 COMMON PARTS ELECTRICAL ENCLOSURE HEAD NO.