dreambaby Mag Lock Manual

F150 Rev. A
Magnetic Locking System
MAG LOCK
®
Door Thickness
Door Thickness
12 to 15mm (1/2 in to 5/8 in)
15 to 28mm (5/8 in to 1-1/8 in)
Look for the Dreambaby range of Child Safety and Care Products.
®
Tee-Zed acknowledges that its customers may be entitled to statutory consumer guarantees and does not seek to exclude or limit them. These
guarantees include that Tee-Zed's products are of acceptable quality. This Tee-Zed product is for the specific purpose detailed in the
instructions and packaging and Tee-Zed considers use outside of that purpose to be abnormal use. To the maximum extent permitted by law,
Tee-Zed does not accept any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than in accordance with the supplied installation and removal instructions; or
• arising under the law of tort or contract.
Dreambaby ® products by
Tee-Zed Products Pty Ltd, PO Box 2022, Bondi Junction NSW 1355
Australia Tel: (02) 9386 4000
Tee-Zed Products (N.Z.) Ltd, PO Box 64013, Botany Town Centre Auckland
New Zealand Tel: (09) 274 8788
Tee-Zed Products Ltd, PO Box 29227, Dunfermline, KY12 2DN
United Kingdom Tel: +44 (0)844 800 9445
info@tee-zed.co.uk
Made in Dongguan, China.
©2014 Tee-Zed Products Pty Ltd
A
Lock Configuration
(refer to diagram to right)
Omit Plunger Pin
Use Plunger Pin
info@tee-zed.com.au
www.maglock.com.au
www.dreambaby.co.uk
www.dreambaby.com.au
facebook.com/Dreambabysafety
Components
(Mag Lock Key not included in F153 or F154)
®
A. Installation Templates
B. Mag Lock
®
C. Catch
B C
Lock
Configuration
not drawn
to scale
For cabinet doors thicker than 28mm (1-1/8 in), please
email us at info@tee-zed.com.au
Please keep instructions for future reference.
CAUTION: This product contains very powerful magnets.
Do not place near CREDIT CARDS, CD's, VIDEOS, TAPES etc.
electrical sources, wire mesh racks, or metal canned goods.
D. Mag Lock Key F. Disengaging Clip
®
E. Plunger Pin G. 12mm (1/2 in) Screws
D E F
Disengaging
Clip
12 to 15mm (1/2 in to 5/8 in)
15 to 28mm (5/8 in to 1-1/8 in)
When installing MAG LOCK or when it is in use,
®
ensure that it does not make contact or come close to
G
Plunger
Pin