Table of Contents
Advertisement
Quick Links
32cm 1400W Electric
Scarifier and Rake
These instructions contain important information that will help you get the best
from your product, ensuring it is assembled correctly and safely. If you need help
or have damaged or missing parts, call the Customer Helpline on 01904 727 509.
53cm Self Propelled Petrol
Rotary Lawn Mower
577157
Instruction
Manual
IMPORTANT!
Please read these
instructions fully before
starting assembly.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerBase DT5310
Summary of Contents for PowerBase DT5310
- Page 1 Instruction Manual 53cm Self Propelled Petrol Rotary Lawn Mower IMPORTANT! 32cm 1400W Electric Please read these Scarifier and Rake 577157 instructions fully before starting assembly. These instructions contain important information that will help you get the best from your product, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727 509.
-
Page 2: Table Of Contents
Contents General Safety Warnings General safety warnings Safety warnings Intended use WARNING! Warning symbols Read all safety warnings and all In the box instructions. Failure to follow the Assembly warnings and instructions may result in Preparation electric shock, fire and/or serious injury. Carefully read the instructions for the Operation safe operation of the machine. - Page 3 • Operate the machine in a recommended Training position and only on a firm, level surface. • Read the instructions carefully. Be familiar • Do not operate the machine on a paved or with the controls and the correct use of the gravel surface where ejected material could equipment.
- Page 4 • Never operate the machine with defective 4) After striking a foreign object. Inspect guards or shields, or without safety devices, the machine for damage and make for example deflectors and/or the grass repairs before restarting and operating the collector, in place. machine;...
-
Page 5: Intended Use
Intended Use • Be careful during adjustment of the machine to prevent entrapment of the This product is not intended for use by persons (including fingers between moving tine assemblies children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given and fixed parts of the machine. -
Page 6: In The Box
In the Box Do not operate or expose the product to rain or wet conditions. Parts Risk of electric shock. Switch box 2. Switch bar Switch off! Remove the plug from the mains before cleaning or maintenance. 3. Upper handle 4. -
Page 7: Assembly
Assembly WARNING! Remove the plug from the main power source before undertaking the assembly or adjustment. Handle bar assembly Place the machine on firm ground. Take out the handles and hand bars. 2. Align the lower handle bars with the frame (lower hand bar hole). Keep the direction of both lower handle bars in line with the wheels to help to make the holes on the handle bar correspond with those in the frame. -
Page 8: Preparation
5. Put the cable strain relief on the upper handle bar, just under Install correct cutting device the switch box, then align the upper handle bar with the middle handle bar and secure them with one mounting set on each side. - Page 9 4. Slide the hex nut out the socket of the drive shaft and the 3. Put the drive shaft on the upper bearing seat, and keep it in the bearing from the support with the bolts and spring washers. correct position. 4.
-
Page 10: Operation
Operation Adjust the working height setting Push the depth adjustment lever towards the wheel and then move Switch on/off it forward or backward to adjust the required cutting depth. Begin by pressing the lock-off button fully, then hold the start/stop lever. - Page 11 NOTE: Overload protection Scarifying work The overload protection will be activated in the following circumstances: Ensure the scarifying drum with the metal blades is fitted to the machine. You can adjust the working depth with the depth 1) A build up of scarified material around the cutting device. adjustment lever.
-
Page 12: Maintenance And Repair
Maintenance and Repair 3. Clean raking cylinder with fine needles When finished, the lawn rake tines and underside of the machine body should be cleaned with a clean cloth or stiff brush, ensuring Clean machine body dirt and grass does not build up over time. To ensure longevity, the machine should be regularly cleaned using Always wear suitable gloves when handling the drum. -
Page 13: Troubleshooting
WARNING! Only perform the steps described within these Property Value instructions! All further inspection, maintenance and repair work must be performed by an authorised service Model no. DT5310 centre or a similarly qualified specialist if you cannot solve Rated voltage 220-240V~50Hz the problem yourself! Power input power... -
Page 14: Havs Safety
HAVS safety Warranty This product is covered by a 2 year warranty. WARNING! This equipment may cause Hand-Arm Vibration Syndrome (HAVS) if its use is not adequately monitored and The warranty covers any manufacturing defect in materials, managed. workmanship and finish. Preventative measures include, among others, regular maintenance Any claim under this warranty must be made by going to your and care of the product and cutting attachments, keeping hands...
Need help?
Do you have a question about the DT5310 and is the answer not in the manual?
Questions and answers
Where can I purchase a rake cylinder (L1710034) for my DT5310 Powerbase electric scarifier?
how do i change wires on scurifier