Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) Table of Contents Motorized TV Lift Aftermarket Kit Motorized TV Lift Aftermarket Kit Introduction Part # Part # Description Description .
Installation and Owner’s Manual (For Aftermarket Applications) Introduction The Schwintek Motorized TV Lift is a great way to save on counter space and an impressive way to display TV. The lightweight system is easy to install and program, and smart THE “WARNING”...
Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) Parts List Resources Required NOTE: Part numbers are shown for identification purposes • Cordless or electric drill or • #10 Phillips pan screw gun head screws only. Not all parts are available for individual sale. All parts with a link to the Lippert Store can be purchased.
Page 4
Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) 3. Mount TV lift controller (Fig.2) close to end of motor wire harness (Fig.1C) using two #10 screws in the pre-drilled locations (Fig.2B). Fig.2 A. Plug motor control wires (Fig.1C) into TV lift controller (Fig.2A).
Page 5
Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) 6. Insert the assembled rack (Fig.4A) into the bearing block 7. Mount the cabinet top transition piece onto (Fig.4E) by aligning the V-grooves (Fig.4B) in the rack to the the rack.
Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) Programming Operation To enter programming mode, press and hold the white 1. To raise the TV, press and release the switch’s UP CONFIGURATION button (Fig.8A), located on the control, button on the remote (Fig.9A) or press and release the...
Schwintek Motorized TV Lift Installation and Owner’s Manual (For Aftermarket Applications) Wiring Diagram PN 325978 motor PN 199082 back of switch PN 199082 front of 30 amp PN 253396 switch circuit controller protection 12V DC battery Switch Switch Controller Controller...
(For Aftermarket Applications) Notes Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts. All manual information is subject to change without notice. Revised editions will be available for free download at lci1.com.
Need help?
Do you have a question about the Schwintek and is the answer not in the manual?
Questions and answers