Table of Contents
Advertisement
-
IP Address: Enter IP address for this Access Point.
Subnet Mask: Enter the subnet mask for this Access Point.
-
Default Gateway: Enter Default Gatewayfor this Access Point.
-
DHCP: There are three options for DHCP – Disabled, Client and Server.
-
DHCP Client Range: you can define the IP range for DHCP clients. You can
-
click the "Show Client" button to display the current active DHCP clients.
DNS Server: It will active when the DHCP Server is enabled.
-
802.1d Spanning Tree: On LAN side, it supports Spanning Tree Protocol to
-
avoid physical loop problem.
-
Clone MAC Address: You can assign a new MAC address for external DHCP
server to be cloned.
Hide quick links:
Advertisement
Table of Contents
