• Connect the power • Use an Ethernet cable to connect the camera to your network • Install the search tool software from the CD to a computer on the network Basic Setup...
Page 5
• Run the CIC-920W program by going to start>>programs>>CIC-920W...
Page 6
• Double click the found camera to bring up the camera interface.
Page 7
How to setup wireless • Click on basic settings icon • Click on Network • Click on Wireless tab • Enter the SSID of your wireless router/AP • Match the Auth/encryption settings used by your wireless router...
Page 9
Where to store images • CIC-920W can be configured to capture snapshots or record video to any location on the network • This can be done in the Video settings page • Just enter the location for storing snapshots and recordings. This location could be the CNet NAS CLD-221P that can be accessed from anywhere.
Viewing captured images • All captured images are in jpg format • All recorded files are in .av format • Play back recorded .av files by going to the monitor page, browse to the location holing the files, select the av file and click on play •...
Need help?
Do you have a question about the CIC-920W and is the answer not in the manual?
Questions and answers