Download Print this page

SENDO S200 Troubleshooting page 2

Advertisement

Can't make/receive calls
Low earpiece volume
Low ringer tone
Cannot enter some words
"Message list full" is displayed
in the main screen
Some features do not work
Some menus are missing
Network not allowed
Weak signal
Phone is switched off
Check the number
Call key not pressed
Network is busy
Call barring or fixed dialing is
activated
Not registered with service
provider
No credit left on your prepaid
card
Low setting
Low setting
Wrong entry mode
Your SIM card memory is full
of text messages; therefore you
cannot receive any more
messages.
Feature not supported by the
operator or your subscription.
There are restrictions on your
SIM card or subscription.
Try reselecting the network.
Switch off and then back on.
Check that the service provider
name is displayed on the screen.
If not try to reconnect to the
network.
Press
for a few
seconds.
Use the full area code and
country code in the number.
After dialing the number you
must press
,
If you hear rapid beeps, then the
network is busy. Hang up and
try again.
Check the fixed dialing settings.
Otherwise check the call barring
settings with your service
provider.
After purchasing your phone,
you may need to call your
service provider to activate the
line.
Recharge your credit.
Press the Up side key when you
are in a call to increase the
volume.
Go into the Sounds menu, select
Volume and increase the setting.
Your phone has T9 text input
(i.e. it guesses what words you
are trying to enter). To enter a
special word press
repeatedly to change to
normal multi tap mode.
Go into the Read menu of the
message menu and delete some
of your messages.
Call your service provider.
Call your service provider.

Advertisement

loading