Advertisement
Test machine type/name
Test machine serial No.
Test machine calibration date
2
Measurement error
Min Torque:
1
Max torque:
Tolerance ± 4 % of Test Load
Test
Test
%
Load
Min
20%
4
60%
12
100%
20
Min Torque:
2
Max torque:
Test
Test
Tolerance ± 4 % of Test Load
%
Load
Min
20%
4
60%
12
100%
20
Tool Model Number
Tool Serial Number
Tested by (print name)
4
Date of test
Notes:
1
Testing is in compliance with International Standard procedures, with test equipment calibrated by a
laboratory traceable to International Standards.
2
Measurement error shall be less than ¼ of the maximum permissible relative deviation of the torque
tool.
3
The observed values fall within the maximum permissible deviation (tolerance). For tools with a
flexible head, the result is valid only if the measuring axis is perpendicular to the axis of the tool.
4
This Sealey Declaration of Conformance is issued at the time of manufacture. Its' validity is open
ended until the torque tool is used for the first time. The default re-calibration period of 12 months (or
5,000 cycles, whichever occurs first) starts after first use of the torque tool (BS EN ISO 6789-1:2017,
clause 5.3 refers).
© Jack Sealey Limited
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Lifetime guarantee with this product, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Declaration of Conformance
(in accordance with BS EN ISO 6789-1:2017)
TORQUE TESTER
2020/6/20
4
20
Max
3.84
4.16
11.52
12.48
19.20
20.80
4
20
Max
3.84
4.16
11.52
12.48
19.20
20.80
STW701
John Li
01284 703534
Original Language Version
T ORQUE T OOL
C AL IBRAT ION C E RT IFIC AT E
Measurement uncertainty
Ambient temperature
4266
Humidity
±1%
Test units: (Nm, lb/ft etc)
Clockwise
Completed test reading
1
2
Anti-clockwise
(This part 2 to be completed only where applicable)
Completed test reading
1
2
sales@sealey.co.uk
STW701, 702, 703, 706, 707 Issue:3 (6) 07/08/20
1
3
3
4
5
3
3
4
5
Issue 4P 30/05/18
www.sealey.co.uk
0.031kgf.m
30
°C
59
%
Nm
Average
Average
Advertisement
