Advertisement
5. ASSEMBlY
Note: Numbers shown in brackets refer to item numbers on fig.1.
5.1.
ASSEMBlY
5.1.1.
Slide the expansion beams (2) into the ends of the fixed beam (5), ensuring the threaded holes protrude from the fixed beam.
5.1.2.
Screw in the adaptors (1) and secure the chains (3) using the bolts (4).
OPERATION
5.2.
5.2.1.
Remove the saddle from the jack.
5.2.2.
Fit the cross beam adaptor to the jack. Secure using the bolt (7) and washer (6).
Note: The securing bolt can only be used on models 2080CX and 3080CX.
5.2.3.
Adjust the position of the adaptors to ensure they are under the lifting the points recommended by the vehicle manufacturer (see vehicle
handbook), before commencing the jacking operation.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
ENvIRONMENT PROTEcTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
X136 | Issue:2 (H,F) 03/09/18
Advertisement
