Download Print this page

FGE FARELEK PTC902 Manual page 5

Ceramic blowing heater

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
Security measures
• Do not cover, or use to dry clothes
• Do not use without feet attached
• Only use in the upright position on a flat level surface
• The surface of this fan heater is not closely supervise any children and pets in using
• Do not use fan heater near flammable or heat sensitive items.
• Do not position in point of or under power sockets
• Do not shelving or or other obstructions to airflow.
• For indoor use only.
• Switch off and unplug when not in use
• Do not full the heater along the cord or use if damaged
• Do not use heater in humid or wet environments
• If the supply cord is damaged, it must be replaced by an electrician or similarly qualified person to
avoid hazard.
• The heater must be placed at least 1meter from all object with a risk (Curtains, spray-form, etc...)
• Keep clear the heater from Shower, bath, Sink or pool.
• Never touch the heater with wet hands
• Do not put water inside the heater.
• please ever use the heater in a stable position on his base.
• Make sure that your home supply correspond to the supply indicated on the heater
• Never put objects inside the heater (needles,etc...)
• unplug the heater before cleaning
• Do not use corrosive or solving products to clean your heater, you may damage the surface
• It is advisable to put away the heater in a wetproof room
• Do not use in a dusty room or room with a fire risk
• Never dismantle the heater by yourself, please consulting your provider.
• Take care to be sure that the heater is cold before roll away the supply cord.
• If this heater is oil filled, he need the opening of the oil tank to be repaired. It must absolutely be
done by your provider (or after sale service) in case of oil leak.
• Please respect the reglementations of your country for the oil process of elimination
• Do not use this heater with a programmer, a timer or anything else device which puts the heater on
position «on» automatically, because there is a fire risk if the heater is covered or badly placed..
122440-Manuel-B.indd 5
© FAR GROUP EUROPE
EN
22/06/06 11:56:19

Advertisement

loading