Page 1
User Guide MH961 & MH995 HD Color LCD Monitor Split-view(7”)/(10.1”) Please read this manual thoroughly before operating the unit, and keep it for future reference. V1711.01 1.855.730.5555 www.nbs-cam.com...
In case of any problems, please turn off the display at once and notify our company or authorized dealer. The monitor is a complex device. Any disassembly or modification may lead to damage and void the warrantee. 1.855.730.5555 www.nbs-cam.com...
Page 4
This symbol is intended to alert the user not to dispose of electrical and electronic equipment. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your warrantee and necessitate expensive repairs. 1.855.730.5555 www.nbs-cam.com...
2. ACCESSORIES U Support Bracket Center Mount Bracket Sun shield Power cable Angle adjustment screws IR remote control SPECIAL NOTICE Accessory supply may be different for different application. 1.855.730.5555 www.nbs-cam.com...
To GND Single White wire To positive power wire of Left Single Blue wire To positive power wire of Right Single Green wire To positive power wire of Front Single Brown wire To positive power wire of Back 1.855.730.5555 www.nbs-cam.com...
4. SPECIFICATIONS HD Color LCD Monitor – Split view MH961(7”)/ MH995(10.1”) 4 Channel 7’’ /10.1’’ HD single-view monitor with LVDS interface, support input up to resolution at 1920*1080 Support 4 channel cameras in PAL / NTSC / HD-AHD、HD-TVI、HD-CVI (1080P) ...
1. Please align the remote control with the infrared-receiving window on the monitor to operate. 2. Never disassemble the remote control or allow it to drop, or become wet. 3. Press the control buttons firmly. Allow 2 seconds for the picture to change. 1.855.730.5555 www.nbs-cam.com...
● Touch anywhere in White lined section to call home menu. ● When signal source is selected to be cameras, image display mode can be switched by sliding to left/right on screen in the order: Left > Right >Front >Back > Left. 1.855.730.5555 www.nbs-cam.com...
● Touch the icons to enter the menu or touch the area out of the white lined to exit. 3. Volume ● Drag the slider on volume bar to adjust volume. ● Click speaker icon to set Mute or Unmute. 1.855.730.5555 www.nbs-cam.com -10-...
5. MENU OPERATION AND FUNCTIONAL SPECIFICATION 6. Setting 6.1 Camera setting ● Set Camera name within 8 digits ( max.) 1.855.730.5555 www.nbs-cam.com -12-...
Page 13
5. MENU OPERATION AND FUNCTIONAL SPECIFICATION 6.2 Parking line ● Touch to select Line 1 or Line 2 and drag cursor to adjust. 6.3 Language ● Touch to select language for OSD. 1.855.730.5555 www.nbs-cam.com -13-...
Page 14
● When there is trigger, signal source will be automatically switched to the working Camera for display and come back to the previous displaying channel after the trigger ends. ● Support trigger priority. 6.5 Auto Scan ● Auto Scan Delay Range:1~60s. 1.855.730.5555 www.nbs-cam.com -14-...
Page 15
Note: For quick display, please set Automatic OFF and use manual selection per your specific needs. E.g.: If you use an AHD camera at 1080P25, select as above. Or press to setup formats of all channels automatically. 1.855.730.5555 www.nbs-cam.com -15-...
Page 16
5. MENU OPERATION AND FUNCTIONAL SPECIFICATION 6.8 System ● Set Menu Lock ON to disable touch control. ● Menu Lock can be enabled/disabled by pressing the physical power button on the monitor for 3 seconds while menu is off. 1.855.730.5555 www.nbs-cam.com -16-...