Product Warranty Terms; Liability Statement - ZILNK DH23H Installation Instruction

Install Camera to the Wall
NOTE: Prior to installation, ensure that the installation environment can support at least 3 times the weight
of the camera.
1) Drill pilot holes in the position that you wish the camera to be seated using a 3/16 drill bit.
2) Seat the included drywall mounts in the pilot holes that you drilled.
3) Screw the mount on the drywall mounts with the screws provided. Once the position is set, tighten the
screws securely.
Thank you for purchasing our security network camera! This quick installation guide only covers the installation
method of SD card and camera. For other advanced software settings, such as motion detection, email alarm, FTP
settings, etc., please find the corresponding instructions in the "User Guide" on the CD.
We would be delighted if you could contact us with questions about service requests by email at support@zilink.cn.

Product warranty terms:

respected user:
Thank you for choosing ZILNK products, please read the following terms carefully before installing and using this
product: 1. The warranty period of this product is one year from the date of receipt, subject to the valid proof of
purchase. During the warranty period, ZILNK will provide free repairs for faults caused by the quality of the product
itself under normal use. 2. The following conditions are not covered by the warranty: any malfunction or defect
caused by improper use environment or conditions; any malfunction or defect caused by improper installation,
misuse, unauthorized maintenance, modification, accident, force majeure or other external causes; Any failures or
defects caused by third-party products, software or components; the product has exceeded the warranty period; the
product barcode cannot be recognized or does not match; other failures or damages that are not caused by the
product's own design, technology, manufacturing, quality, etc. 3. If the returned product does not meet the terms of
this limited warranty, the company will charge the corresponding cost for repairs. 4. The repair process only needs to
send back the faulty equipment, do not bring SD cards, batteries, non-ZILNK products, etc., if lost after carrying,
ZILNK will not bear the corresponding responsibility.

Liability statement:

To the maximum extent permitted by law, this manual and the described products including its hardware, software,
firmware, etc. are provided "as is" and may have defects or errors. ZILNK does not provide any form of express or
implied guarantee, including but not limited to guarantees of marketability, quality satisfaction, suitability for specific
purposes, etc.; nor does it provide any special, incidental, incidental or indirect damages caused by the use of this
manual or the use of ZILNK products. Compensation, including but not limited to loss of business profits, system
failure, loss of data or documents. You are aware of the open nature of the Internet. If you connect your product to
the Internet, there may be risks such as network attacks, hacking attacks, and virus infections. ZILNK is not
responsible for the abnormal product work, information leakage and other issues caused by this, but ZILNK will
provide you with timely information. Product-related technical support. When using this product, please strictly abide
by applicable laws and regulations to avoid infringing on the rights of third parties, including but not limited to
publicity rights, intellectual property rights, data rights or other privacy rights. You also must not use this product for
weapons of mass destruction, chemical and biological weapons, nuclear explosions, or any unsafe use of nuclear
energy or purposes that violate human rights. If the content of this manual conflicts with applicable laws, the legal
provisions shall prevail.
Kamera an der Wand installieren
HINWEIS: Stellen Sie vor der Installation sicher, dass die Installation Umgebung mindestens das 3-fache des
Gewichts der Kamera.
1) Bohren Sie Pilotlö cher in der gewü nschten Position der Kamera mit einem 3/16 Bohrer einzusetzen.