Advertisement
Water Sensor User Guide
The water sensor detects water and transmits a signal to the Noah
hub triggering an alarm.
Features
Tamper Alarm
If an intruder attempts to remove or damage the sensor, a tamper
alarm is triggered and the user is notified immediately.
1. Transmitter
2. Leak detection cable
3. Water sensor
4. Pairing button
5. Battery compartment
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Time2 Water Sensor v1.1
Summary of Contents for Time2 Water Sensor v1.1
- Page 1 Water Sensor User Guide The water sensor detects water and transmits a signal to the Noah hub triggering an alarm. Features 1. Transmitter 2. Leak detection cable 3. Water sensor 4. Pairing button 5. Battery compartment Tamper Alarm If an intruder attempts to remove or damage the sensor, a tamper alarm is triggered and the user is notified immediately.
- Page 2 Pairing the water sensor to the Noah Hub 1. Open the Clan at Home app on your smartphone or tablet 2. Click Noah Alarm System 3. Press the icon to enter the accessories menu 4. Press the (+Add) icon. The Noah hub LED will turn purple when it is ready for pairing.
- Page 3 Installing the water sensor 1. Open the back cover of the sensor, check the battery is fitted properly 2. Ensure the area that the sensor will be located is clean and free from dust and moisture. The sensor should be around 1-2mm away from the surface you are monitoring, the sensor should not be touching the surface.
Need help?
Do you have a question about the Water Sensor v1.1 and is the answer not in the manual?
Questions and answers