Download Print this page

Sealey PEH5001 Quick Start Manual page 2

5000w industrial ptc fan heater - 415v 3ph

Advertisement

dO nOt use the heater for any purpose other than for which it is designed.
8
dO nOt use a timer or other remote device to operate the heater.
8
dO nOt allow children to touch or to operate the heater.
8
dO nOt site the heater below an electrical socket outlet.
8
dO nOt use the heater without the grille fitted.
8
dO nOt use the heater out of doors. These heaters are designed for indoor use only.
8
dO nOt cover heater when in use, and do not obstruct the air inlet and outlet grilles.
8
dO nOt place heater too close to yourself or any object, allow the air to circulate freely.
8
dO nOt touch the outlet grille of the heater during and immediately after use as it will be hot.
8
2. intrOductiOn
Industrial fan heater with PTC heat conducting ceramic elements to achieve an instant, totally dry heat with no condensation, no gas, no
fumes and no smell. Ambient room thermostat maintains temperature at a pre-set level, Ideal for industrial applications with two heat settings
or fan only. Supplied with power cable.
3. specificatiOns
Model no:.....................................pe5001
Power Settings:......................3300/5000W
Supply:...............................................415V
dimensions (WxdxH):.....300x235x343mm
Weight:..............................................4.2kg
4. heater OperatiOn
4.1.
Place the heater on a level floor in the area you require to heat. Allow a minimum of 2mtr between the heater and adjacent objects.
4.2.
Plug the heater into the mains supply and select the required output by using the rotary switch on the top of the heater. The setting are
4.3.
fan only, half heat, full heat. The thermostat is operated by the second nob.
4.4.
To switch the unit off, select "0". Allow the unit to cool before handling or storage.
WarninG! dO nOt touch the top of the heater when in use as it becomes hot.
WarninG! Always allow elements to cool before moving the units. Use only on a smooth even surface.
5. Maintenance
WarninG! Before attempting any maintenance ensure the unit is unpluged from the mains power supply, it is cool and on level
ground.
dO nOt use the heater with out the grills fitted.
8
5.1.
Sealey recommend that repairs are carried out by a qualified electrician.
Weee reGulatiOns
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
enVirOnMent prOtectiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PeH5001 / | Issue 3 (eRP) 30/07/19

Advertisement

loading

This manual is also suitable for:

Peh5001.v1