Advertisement
2. INTRODuCTION & SPECIFICATIONS
Recharges Sealey 12V Lithium-ion battery (Model No: CP40BP) in 1
hour. LED's indicate when charging and when charging is complete.
Intelligent charging process maximizes battery life.
Input Supply: ................................................................. 230V AC 50hz
Output: ........................................................................... 12V DC - 1.5A
Weight: ........................................................................................0.5 kg
Battery Model No (not included): ...........................................CP40BP
3. CHARGING
CHARGING THE BATTERY (NOT INCLuDED, ORDER
MODEL No: CP40BP)
Note: When new, the battery will have been shipped in a low charge
state. Fully charge the battery before using your tool
3.1
To remove the battery from the charger, depress the two
side clips on the battery. DO NOT touch the metal battery
terminals.
3.2
Take the base charger and plug it into the mains.
3.3
The battery is designed to fit into the charger one way
only. This is to ensure that the positive (+) and negative (-)
polarities correspond. Insert the battery and press lightly to
seat the battery firmly into the charging base, as in fig.1.
WARNING! DO NOT try to force battery into the base the
wrong way around.
3.4
When the battery is inserted into the charger the green LED
(fig.1) will begin to flash, this indicates the battery is charging.
3.5
When the green LED (fig.1) stops flashing and is solid the
battery is fully charged.
3.6
If the red LED (fig.1) illuminates the battery is too hot to charge
and will need to cool down before the charging cycle begins.
3.7
If the red LED (fig.1) flashes this means either the battery is
not seated in the charger correctly or the battery is defective
and should be replaced.
3.8
Remove the battery from the charger. Switch off and remove
the plug from the mains. Push the battery back into the
charger (fig.2) until it snaps into place. The charger is now
ready for use.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner
which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Declaration of Conformity
MAINS CHARGER
Models: CP40MC
2004/108/EC EMC Directive
2002/95/EC RoHS Directive
2002/96/EC WEEE Directive
93/68/EEC CE Marking Directive
2006/95/EC Low Voltage Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
Environmental Protection
We, the sole importer into the UK, declare that the products listed here are in conformity with the following standards and directives.
The construction files for this product are held by the Manufacturer and may be inspected, by a national authority, upon
request to Jack Sealey Ltd.
Signed by Tim Thompson
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Tools.
Sole uK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
6th July 2009
01284 757500
Web
01284 703534
email
fig.1
www.sealey.co.uk
sales@sealey.co.uk
CP40MC Issue: 1 - 06/07/09
Advertisement
