Matco Tools CRHDWB Owner's Manual

CRHDWB_manual_012_10867.00 __ 03-26-2021
Save This Manual For Future Reference
HEAVY DUTY WIDE BODY CREEPER
DESCRIPTION
Heavy Duty Wide Body Creeper has 1˝ diameter welded steel
tube frame. Frame is 20˝ wide and 44˝ long, upholstered vinyl
fabric over 2˝ foam bed and headrest. Six 3˝ high-impact, non-
marking, oil-resistant casters withstand harsh environments.
Creeper has comfortable pillow style adjustable headrest.
500 pound load capacity with 1½˝ ground clearance.
ASSEMBLY INSTRUCTIONS
Read these instructions before starting; follow assembly
procedures carefully.
1. To install casters (Key No. 4) onto frame (Key No. 1), place
creeper on a workbench.
2. Insert stem portion of caster into one of the six holes in
bottom of frame. Make sure stem portion of caster fits
completely into frame. It may be necessary to use a punch
and hammer to tap caster into frame.
3. Repeat process for five remaining casters. Make sure all six
casters are properly seated into holes in bottom of frame.
4. Place headrest (Key No. 3) under frame with thickest part of
headrest towards top of frame. Align T-nuts in headrest with
four holes in frame.
5. Slide flat washer (Key No. 6) over pan head screw (Key No. 5)
and secure headrest to frame. Secure three remaining
screws with washers to headrest and tighten securely.
GENERAL SAFETY INSTRUCTIONS
• Do not stand on creeper.
• Do not use this creeper as a stool or bench.
• Only use creeper when fully assembled.
• Periodically check fasteners and tighten securely if needed.
• Never use creeper if it does not perform according to this
manual.
• Do not exceed creeper maximum weight capacity of
500 pounds.
Part No. 10867.00 Sold by Matco Tools, 4403 Allen Road, Stow, OH 44224-1096
.
OWNER'S MANUAL
INDUSTRIAL SEATING LIMITED WARRANTY
Product is warranted against mechanical or structural failure due
to defective material or workmanship for 1 year. Provided
however, this warranty lasts only so long as you own your
product. If you sell or otherwise transfer the product this
warranty terminates automatically. Products that are damaged
or made unserviceable by accidents, abuse, misuse or are
altered in anyway are not covered by this warranty.
Matco Tools reserves the right to replace or recondition at its
option, any units covered by this warranty. All return shipments
require Material Return Authorization and must be freight
prepaid unless otherwise approved in writing.
If any product covered under this warranty fails to meet the
terms of this warranty or it is in any respect broken, defective
or missing parts, please call us immediately at toll free
1-866-289-8665. Any attempts to make unauthorized repairs
will void this warranty in every respect.
This warranty gives you specific legal rights. You may have other
rights which vary from state to state, however such implied
rights are limited to a period of one year from the date of your
initial purchase. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not
apply to you.
Matco Tools will in no event be liable for incidental or
consequential damages for any amount in excess of the original
purchase price. Some states do not allow exclusion or limitation
of such damages, so the above limitation or exclusion may not
apply to you.
HOW TO ORDER REPAIR PARTS
When ordering repair parts or reporting problems, always give
the following information:
NAME OF ITEM
Heavy Duty Wide Body Creeper
PART DESCRIPTION
_________________________________
All parts listed may be ordered from Matco Tools® Customer
Service at 1-866-289-8665.
Model No.
CRHDWB
MODEL NUMBER
CRHDWB
PART NUMBER
_______________
March 2021