Advertisement
2. SPECIFICATIONS
Electric fan heater for industrial applications. one heat setting with thermostat control, plus fan only setting. A totally dry heat with no
condensation, no gas, no fumes, so no smell. Ideal for workshops, garages etc.
Model: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EH2001
Voltage:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V
Power rating:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000W
IMPORTANT! this unit is designed to raise the ambient temperature of an entire room, the temperature of the air coming out of the front of the
heater will be warmer than the general temperature of the room, but there may not be a significant increase due to the large volume of air passing
over the element. for the same reason, the element is hot during operation, but does not visibly glow. the room temperature depends on room size,
insulation and the ambient temperature, which will increase as the room gets warmer.
3. OPERATION
3.1.
Position heater in an upright position on a firm surface and at a safe distance from any obstructions, flammable substances etc. Keep to a
minimum of 0.5mtr clearance at the rear and sides, and 2mtr clearance at the front.
3.2.
connect the heater to a suitable mains supply.
3.3.
set the thermostat dial to its maximum setting (fully clockwise).
3.4.
the heater will switch on when the power setting dial is set to the heater setting.
NOTE: It will take up to three minutes for the heater to reach optimum temperature.
3.5.
once the room reaches the required temperature, turn the thermostat dial slowly counter-clockwise until the thermostat clicks, leave the
dial in this position to maintain the room temperature at this setting. the heater will continue to operate until the power switch is turned to
the off position.
3.6.
for fan only operation, turn the power/fan selector to the fan only setting, and set the thermostat to its minimum setting.
3.7.
When not in use, disconnect the heater from the mains supply. store it in a safe, dry, childproof location.
Power / Fan
Selector
4. MAINTENANCE
WARNING! Before attempting any maintenance, ensure that the unit is unplugged from the mains power supply and that it has cooled down.
4.1.
clean the heater with a soft dry cloth only. DO NOT use abrasives or solvents.
4.2.
Periodically check the heater grille to ensure that it is not blocked.
no other maintenance is necessary. If a problem with the heater is experienced, or if the power lead or plug is damaged, contact your
local authorised service agent for repair. DO NOT dismantle or tamper with the heater, as this may be dangerous and will invalidate the
warranty.
NOTE: It may take up to three minutes for the heater elements to reach optimum temperature. This is normal and not a fault.
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging
When the product is no longer required, it must be disposed of in an environmentally protective way.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Fan only setting
OFF
Environmental Protection.
should be sorted, taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
Heat setting:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000W
Dimensions (W x D x H): . . . . . 215mm x 230mm x 280mm
fuse:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13A
Power setting (2000W)
01284 757500
01284 703534
fig.1
Thermostat
www.sealey.co.uk
Web
sales@sealey.co.uk
email
EH2001
Issue: 1 - 20/04/10
Advertisement
