Advertisement
5. asseMbly
step 1
5.1.
Place the workbench top face down on the floor, use the packaging to avoid scratching, Step 1.
5.2.
insert legs into sockets, fasten screws, step 2.
5.3.
Pass the shelf over the legs and slide on for at least 230mm, so that the shelf will sit at least 150mm above the floor when completed,
step 3.
5.4.
tighten the screws, step 4. turn workbench over and adjust feet to level unit.
step 3
enVironMent Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar
01284 757500
Original Language Version
© Jack sealey limited
01284 703534
sales@sealey.co.uk
AP1284ss.V2, AP1560ss.V2, AP1872ss.V2, AP2184ss.V2 | issue 1 26/01/18
step 2
step 4
www.sealey.co.uk
Advertisement
