Advertisement
Quick Links
09/20
Product Code: 2010T
About the TradeQuip brand
The 'TradeQuip' brand of workshop equipment, is designed for use in a demanding workshop
environment
by
Trade" reliability, 'TradeQuip' branded products offer the very best in performance for an
affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
professional
users.
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
PORTA POWER
Specifications:
• Safe Working Capacity: 10,000kg
• Kit Contents: 14 Pieces containing
Pump, Hose and Fittings
• Ram Length retracted: 322mm
• Ram Length fully extended: 452mm
• Extensions: 110, 265, 365, 520mm
• Adaptor Diameter: 33mm
• Hydraulic Hose Length: 1500mm
• Hydraulic Oil Capacity: 650ml
• Nett Weight: 31kg
With
proven
and
Product Code: 2010T
KIT
trusted "Made
for
the
Page 1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for TradeQuip PORTA POWER KIT
- Page 1 • Adaptor Diameter: 33mm • Hydraulic Hose Length: 1500mm • Hydraulic Oil Capacity: 650ml • Nett Weight: 31kg About the TradeQuip brand The 'TradeQuip' brand of workshop equipment, is designed for use in a demanding workshop environment professional users. With proven trusted “Made...
-
Page 2: Table Of Contents
09/20 Product Code: 2010T WARNING IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE WARNING The instructions and warnings contained in this manual should be read and understood before using or operating this equipment. Do not allow anyone to use or operate this equipment until they have read this manual and have developed a thorough understanding of how this equipment works. - Page 3 • When servicing, use only TradeQuip identical replacement parts. Use of any other parts will void the warranty. • Do not modify this Porta Power Equipment and do not use for a purpose for which it was not intended.
- Page 4 09/20 Product Code: 2010T NOTE: When using this Porta Power Equipment always open the oil filler screw/breather screw Pump and Ram Safety Instructions: • When using this Porta Power Equipment, always open the oil filler screw/breather screw (P7). • Then close it when not in use to minimise the chance of seeping hydraulic fluid. •...
-
Page 5: Assembly, Operation, Preventitive Maintenance
1. FEATURES & MODELS This TradeQuip 10,000kg Hydraulic Porta Power Kit is designed to be used for pushing, spreading, and pressing of vehicle body panels as well as various component parts and assemblies. The variety of attachments include a rubber head, flat base, wedge spreader, spreader toes and various extension tubes with a snap lock design for quick and easy assembly. - Page 6 09/20 Product Code: 2010T For other attachment combinations. 3. BEFORE USE Prior to each use conduct a visual inspection checking for abnormal conditions, such as cracked welds, leaks, and damaged, loose, or missing parts. Bleeding Air from the System Air can accumulate in the hydraulic system during the initial setup or after prolonged use, which can cause the hydraulic ram to respond slowly or operate in an unstable manner or even leak hydraulic fluid.
- Page 7 Attachments and extension tubes must always be aligned and fully engaged so ram force is straight, avoiding an off-centre load condition. If bowing or bending or ram or any attachment occurs during use, "STOP", release pressure immediately and reconsider application. PORTA POWER KIT Hydraulic Pump Ram Toe Plunger Toe...
- Page 8 09/20 Product Code: 2010T Ram Attachments • Extensions connect in different combinations to reach desired lengths. • Male Connector connects the female end of the Ram to a Base. • Flat Base is used on the stationary side to spread out the force of the Ram. •...
- Page 9 • Inspections shall be performed in accordance with this owner’s manual. • The Porta Power Kit must be inspected immediately if it is believed to have been subjected to abnormal load or shock. • Owners and /or operators should be aware that repair of this product may require specialised equipment and knowledge (refer to maintenance section).
- Page 10 09/20 Product Code: 2010T Made in China to TQB Brands Pty Ltd specifications Page 10 Visit us at www.tqbbrands.com.au...
-
Page 11: Parts List
09/20 Product Code: 2010T PARTS LIST Description Description Description PORTA POWER KIT RAM CONT PUMP CONT Hydraulic pump Piston rod O-ring Spacing ring PTFE Washer Spreader Washer U-ring Blow mold case PTFE washer Small piston Extension tube set U-ring Retaining ring... - Page 12 09/20 Product Code: 2010T TROUBLESHOOTING PROBLEM SYMPTOM CAUSE CONCLUSION SOLUTION Ram will not lift Pump has resistance Release valve not Bypass through release Ensure Release tightly but no lift tightly closed valve closed Pump has no Air in Hydraulic system Air cavitation in pump Bleed system resistance, lift ram will...
- Page 13 09/20 Product Code: 2010T PROBLEM SYMPTOM CAUSE CONCLUSION SOLUTION Will not lift to full Lift ram has limited Fluid level low Lift ram raised for Fill fluid to correct level extension stroke, pump loses extended period the Bleed system resistance causing air ingress to hydraulic system Ram will not retract,...
-
Page 14: Warranty
WARRANTY TradeQuip products have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase.
Need help?
Do you have a question about the PORTA POWER KIT and is the answer not in the manual?
Questions and answers