Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Gtech HEATWAVE
- Page 1 Model number: HW01 OPERATING MANUAL...
-
Page 2: Important Safeguards
Switch it off, unplug it product. from the mains and contact Gtech on • Remove the product from it’s 01905 345 891. packaging and check to make sure it •... - Page 3 Stop using the • Always unplug the product when not product immediately and contact in use. Gtech on 01905 345 891. • Do not leave the product unattended • Do not use the product if any part is when in use.
-
Page 4: What's In The Box
Thank you for choosing Gtech “Welcome to the Gtech family. I started Gtech to create sensible, easy to use products that do a great job, and hope you get many years of trouble-free performance from your new product.” Nick Grey –... -
Page 5: Installation
Installation Fix the two unit brackets to the main unit Fit the wall brackets to the unit bracket using using the screws and washers provided. the bolt and wingnut provided. The wingnut should be on the outside of the Repeat for both sides. bracket for easy adjustment. - Page 6 at least 40cm at least 40cm at least at least 40cm 40cm 30 º - 45 º at least 180cm The heater must be installed no less than 40cm (16”) from side walls and no less than 180cm (6.0’) above the floor. Also consider proximity to a mains plug socket. WARNING: Before drilling holes check the wall/ceiling is solid and that there are no hidden water pipes or electric wires.
- Page 7 Installation Push the wall plugs into the holes. Insert the screw but do not screw all the way in. Leave the thickness of the wall bracket between the screw head and the wall. WARNING: Do not attempt to install the heater if you have recently switched it on or until it has cooled down.
- Page 8 Installation Important: Ensure that the supply cord is The supply cable can be fixed to the metal well mounted and that it does not come into mounting bracket behind the heater with contact with the reflector of the heater or that plastic zip ties.
-
Page 9: Function And Operation
Function & Operation Plug the product into a mains plug socket. Press the power switch to turn the heater on and off. Product care Your product doesn’t need much maintenance. Regular and careful cleaning will help it operate efficiently for many years. Follow the steps below : Switch off and unplug the power cord. -
Page 10: Troubleshooting
3. Check plug socket has power 4. Replace the BS 13A fuse in the plug Product Support If these initial tips don’t solve your problem, we have various other ways to help. Visit: www.gtech.co.uk/support Online Live chat support support@gtech.co.uk TECHNICAL SPECIFICATION... - Page 11 If your product is within its warranty and has a fault that cannot be resolved from the troubleshooting section or online support, please do the following: • Contact our Gtech Customer Care Helpline on UK: 08000 308 794, who will go through any troubleshooting with you to identify the fault.
- Page 12 Grey Technology Limited Brindley Road, Warndon, Worcester WR4 9FB email: support@gtech.co.uk telephone: 01905 345891 www.gtech.co.uk...
Need help?
Do you have a question about the HEATWAVE and is the answer not in the manual?
Questions and answers