Do not place the commode near naked flames or other heat sources such as electric or gas radiators etc., this may cause a fire. The commode must be fixed to the wall using the supplied roll-over protection tape! Komoda K02 / Commode K02...
Page 3
BEFORE ASSEMBLING THE FURNITURE PLEASE CHECK THAT PACKAGES INCLUDE ALL ITEMS LISTED IN THE TABLE ON PAGE NO 3, AND WHETHER THESE ITEMS ARE NOT DAMAGED !!! IF MISSING PARTS OR SOME OF THEM ARE DAMAGED, PLEASE CONTACT OUR CUSTOMER SERVICE OFFICE. DAMAGES FOUND AFTER ASSEMBLING WILL NOT BE CONSIDERED !!! Komoda K02 / Commode K02...
Page 6
(ZW1). Na mimośrodach (M1) należy umieścić dostarczone plastikowe zaślepki (ZM1). On the visible screws (W6) should be placed supplied adhesive caps (ZW1). On the eccentrics (M1) should be placed supplied plastic caps (ZM1). Komoda K02 / Commode K02...
Page 7
3. Tighten the screws loosened earlier. 4. Slide the drawer and check their positions. 5. If the drawers are mounted properly tighten another 3 screws to stabilize each drawer runner. W razie konieczności czynności powtórzyć. If necessary, repeat the steps. Komoda K02 / Commode K02...