Colour Adjustment; Osd Settings - ProXtend X2K24A User Manual

COLOUR ADJUSTMENT

Adjust the amounts of red, green, and blue present in the
warm mode
image. will give more red,
user mode
will give more blue and
make your own adjustments to the colours.

OSD SETTINGS

language
• : Choose your language.
osd h-position
• : Change the horizontal position of the On Screen Display Menu. Use the up
and down buttons to change the position left to right.
osd v-position
• : Change the horizontal position of the On Screen Display Menu. Use the up
and down buttons to move the display up and down.
osd transparency
• : Adjust OSD menu transparency on the screen.
osd time out
• : Adjust OSD menu display time on the screen.
FREESYNC
• To use this feature, ensure your hardware has FreeSync capability and the graphics drivers are
fully up to date.
• After connecting, you may receive a prompt to enable the feature on your computer. If not, you
may need to enable the function in your graphics card menu.
• See your graphics card manufacturer's documentation on how to turn on and/or enable FreeSync.
SETUP
input source
cool mode
(Auto source, DP, HDMI 1, HDMI 2, HDMI 3).
will allow you to
mute
volume
reset
: Select the input source where your pc or console is connected
: Enable or disable the volume of source connected to the monitor.
: Adjust the volume of the source connected to the monitor.
: This selection will reset the monitor to factory setting.
OTHER
ASPECT RATIO
Wide Screen / 4:3 / 1:1 / Auto
LOW BLUE LIGHT
Off / Low / Middle / High / MaxHigh
RESPONSE TIME
On / Off
FREESYNC
On / Off
English