Page 2
Certification FCC compliance Class A: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Contents Package Contents 1 Product Features 1 Product Overview 2 Port Connections In Port Out Port Hardware Installation Before Installation Power Source Equipment (PSE) Installation Powered Device (PD) Installation Multiple PoE Extender Installation Specifications...
Package Contents Thank you for purchasing the S Ethernet Extender. Product Features • Complies with IEEE 802.3af Power over Ethernet • Extends the range of PoE an additional 100 meters (328ft.) • Forwards both Ethernet data and PoE power to a remote device •...
Port Connections In Port Connect the PoE IN port from following 802.3af PSE type devices through a CAT-5e/6 UTP cable: • PoE injector • PoE Injector Hub • PoE Ethernet Switch • Another Out Port Connect the PoE OUT port to following 802.3af PD type devices through a CAT-5e/6 UTP cable: •...
Page 6
Hardware Installation operates at t different data rates – 10Mbps 00Mbps in the same device and automatically adjusts based on the speed of incoming connection. The following section describes the hardware features of the . Carefully read this section before connecting any network device to this unit.
Page 7
2. The PSE delivers both Ethernet Data and PoE power over the UTP cable to the POE- Powered Device (PD) Installation 1. Connect one side of the CAT5e/6 cable to the "OUT" port of the POE- , and the other side to the PD. 2.