Download Print this page

Buffalo WLE-POE-S Setup Manual page 3

Power over ethernet supply

Advertisement

■ NOTE: Using a cable other then CAT5 may prevent the supply of power to the
AirStation. Also, the POE receiver does not have a repeater function. Thus, the
total length of cable allowed between the Power Supply Adapter and the POE
Receiver is 100 meters.
Compatible AirStations
POE-compatible AirStations
* WLM-L11G
Non-POE-compatible AirStations
Adapters, sold separately.)
* WBR-G54
* WBR2-G54
* WHR3-G54
* WLA-G54
* WLA-G54C
* WLA2-G54
* WLI-TX1-G54
* WLI2-TX1-G54
Compatible POE Receiver Adapters
* WLE-POE-R33 (For 3.3v AirStation Products)
* WLE-POE-R7 (For 7v AirStation Products)
■ NOTE: The WLE-POE-S Power Supply Adapter uses the IEEE802.3af
standard and injects 48V over the CAT5 cable. The WLE-POE-S Power Supply
Adapter can be used with IEEE802.3af POE Receiver Adapters. However, it is
recommended to always use the WLE-POE-R33 or WLE-POE-R7 POE Receiver
Adapters in conjunction with Buffalo AirStation products.
(These models require the WLE-POE-R33/R7 Receiver
* WLA-L11G
* WLA-AWCG
* WLA-AWCG
* WLAR-L11G-L
* WLAR-L11-S
* WLAR-L11-M
3
Connections

Advertisement

loading