Table of Contents
Advertisement
Quick Links
12V
Battery
Charger
HU6560
4 Banks
4
4 Amp
x
Charging Current
16 Amp
(Total)
Manufactured and Packaged for
Battery Capacity
Automotive Imports Pty Ltd
1.2-120Ah
22 - 28 Lexton Road, Box Hill, Victoria, Australia
User Manual
Made in China
5
Stage
AUS: www.hulk4x4.com.au
NZ: www.hulk4x4.co.nz
For Lead Acid Batteries
Charging
Advertisement
Table of Contents
Summary of Contents for Hulk HU6560
- Page 1 Battery Charger HU6560 4 Banks 4 Amp Charging Current 16 Amp (Total) Manufactured and Packaged for Battery Capacity Automotive Imports Pty Ltd 1.2-120Ah 22 - 28 Lexton Road, Box Hill, Victoria, Australia User Manual Made in China Stage AUS: www.hulk4x4.com.au NZ: www.hulk4x4.co.nz...
-
Page 2: Table Of Contents
Product Features Product Feature..............2 Diagnosis & Recovery............9 Congratulations on your purchase of the HULK Professional 4 Bank Battery Charger is designed for charging simultaneously and Product Safety Feature............2 Bulk..................10 independently up to 4x12 Volt lead-acid rechargeable batteries, widely used in motorbikes, cars etc. The HULK Professional Battery Overheating Protection....... -
Page 3: Safety Information
• Do not touch the battery clips together when charger is connected with mains. • HULK Professional Battery Charger charger is designed for charging 12V 1.2-120Ah Lead-Acid rechargeable batteries. • Charging must be ceased immediately if battery is found to be too hot or leaks out liquid during charging. -
Page 4: Equipment Description
Equipment Description Indication: Component Description: Indication Description Indication Symbol Description Charger Red LED ON for “ POWER ” In case of open circuit or short circuit or reverse connection, LED lights up Detachable mounting Blue light ON for “ Mode ” selection brackets Mounting holes Red LED displays “... -
Page 5: Operation
Charger Quadruple output charger for 4 batteries This mode is suitable for charging small batteries with a capacity below 14Ah. HULK Professional Battery Charger. Each DC jacketed bank cable AC POWER must be properly connected to independent 12VDC battery and observe MODE 2 (14.4/4.0A) -
Page 6: Charging Phases
3) Absorption: A constant low charging current is applied at 0.8A to raise voltage HULK Professional Battery Charger charger performs 5-step fully automatic charging cycle. 80% of energy is returned in this phase of charging. from 14.1V to 14.4V. In this phase complete charging up to almost Here charger performs in two-stages- 100% is achieved. -
Page 7: Trouble Shooting
Maintenance Mounting & Product dimensions Trouble Shooting The HULK Professional Battery Charger does not need any The charger is easy to mount using screws. The charger is specific maintenance. Only install, maintain or service this charger supplied with a pair of bracket containing 4 holes. Two additional... -
Page 8: Technical Data
The packing material is recyclable. ** = A high current ripple heats up battery and reduces life of battery. Against a linear charger, which has a ripple of up to 400%, HULK Professional Battery Charger’s ripple is below 2%, which is much lower than the max 5% for a sealed acid battery.
Need help?
Do you have a question about the HU6560 and is the answer not in the manual?
Questions and answers