XMODS 60-8505 Manual

TM
XMODS Custom RC
Steering and Suspension Upgrade 60-8505
When you need to adapt your vehicle's handling performance to varying driving conditions, the steering and suspension upgrade will
enhance your competitive edge. This updgrade consists of three kinds of tie-rods and three damper springs. Change out the dampers and
springs to improve handling on different driving surfaces. Change out the tie rods to adjust and improve steering.
Knuckles
Front Arm Base
Damper
Damper Spring
S
L
Q
Changing the Dampers and Springs
1
Remove the two screws connecting the damper to
the front or rear arm.
Front Upper Deck
Front Arms
Tie Rod
S u s
c e r w
o c t a o i n D a m p r e
u a n i t y t 2
Rear Arms
p e n s o i n a n d S e t r e n i g U p g
S c e r w G u d i e
F o r t n U p p r e
F o r
D e k c
2
2
Assemble the desired spring color with the damper. Insert the
damper back in the hole and screw the damper back into the
front or rear arm.
Tuning Tips
• To adjust for oversteering, use softer springs in the front and
stiffer springs in the rear.
• To adjust for understeering, use stiffer springs in the front and
softer springs in the rear.
Spring Color
Yellow
Note: The front wheel is detached to show the
location of the tie-rod. Wheels do not have to be
removed to change out the dampers and springs.
a r d e
t n r A m B a e s F o r t n K n c u l k
4 2
Spring Stiffness
Red Soft
Medium
Blue Stiff
s e
www.xmodsrc.com