Advertisement
CHARGING
• When the LED power indictor
(FIG 1) located at the top of the
Housing flashes RED, the battery
requires charging.
- Flip up rubber seal and plug the
Micro USB terminal of the included
Adapter Cord into the Micro USB
port (FIG 5).
- Plug the opposite end of the cord
into the included Wall Charger or
any suitable USB port.
- Plug wall unit into properly grounded 120 VAC, 60 Hz. outlet
- Allow 2.5 hours for full charge.
- The indicator LED at the top of the Housing will flash RED while charging then illuminate
GREEN to indicate full charge (FIG 1).
- Close Charging Port Cover to maintain IP-44 rating.
Batteries will automatically discharge without use and must be charged every
3 months even if the light has not been used.
Do Not charge batteries in temperatures below 40°F [4.4°C].
6
FIG. 5
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
