Summary of Contents for dresden elektronik RaspBee II
Page 1
RaspBee II – ZigBee USB Gateway User Manual The universal Zigbee USB gateway Unites Zigbee devices of many vendors A cloud free solution strong signal range via power-amplifier works with popular Home Automation Systems Technical specification...
Page 2
Docker Connection 1. Insert the battery of type 337/SR416SW as shown in the battery slot. 2. The RaspBee II must be placed on the Raspberry Pi header as follows: dresden elektronik ingenieurtechnik gmbh Tel: +49 351 31850-0 Fax: -10 Kontakt Enno-Heidebroek-Str.
Page 3
Important: The RaspBee II must not be placed in an offset position, as this will damage the module! Raspbian Supported Raspberry Pi models and distributions Raspberry Pi 1, 2B, 3B, 3B+ and 4B Raspbian Jessie Raspbian Stretch ...
Page 8
If the RaspBee II is incorporated into a product, the manufacturer must ensure compliance of the final product to the European harmonized EMC and low-voltage/safety standards. A Declaration of Conformity must be issued for each of these standards and kept on file as described in Annex II of the RED Directive.
Need help?
Do you have a question about the RaspBee II and is the answer not in the manual?
Questions and answers