Advertisement
4. operation
4.1.
to attacH
caution: look for deformation on painted surfaces or soft coatings. If deformation of the surface to be lifted occurs do not
attempt to lift.
4.1.1.
Pump the plunger (fig.1.4) until the cup attaches completely. When the red line (fig.1.3) is hidden, vacuum is sufficient for lifting.
4.1.2.
Check the plunger frequently to make sure the cup remains securely attached. If the red line appears while lifting, immediately set
down the load and pump the plunger until the red line (fig.1.3) is hidden again.
4.2.
to reLeaSe
4.2.1.
Set the load on a secure support.
4.2.2.
There are two methods to release the cup:
a. The preferred method, press the valve release lever (fig.1.2) for a controlled release, hold the lever down until the cup
disengages completely.
b. Pull the release tab (fig.1.1) to instantly disengage cup from mounting surface.
5. maintenance
5.1.
Always keep rubber pad clean and free of oil or grease. Clean suction pad regularly with non-aggressive cleaners.
do not expose rubber pad to sunlight over extended period of time, to preserve elasticity.
8
5.2.
If the cup does not function normally, the cup face may be dirty or the cup may require service. First clean the cup. If the condition
persists, contact an authorised stockist for service.
fig.1
3
4
environment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson way, Suffolk Business park, Bury St edmunds, Suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
2
1
www.sealey.co.uk
AK98945 Issue 1 13/08/19
Advertisement
